Description
This is the heavy-duty steel version of EGW's popular Savage scope base, machined from solid steel and finished in a durable matte black hardcoat. It's a one-piece Picatinny rail with a built-in 20 MOA of forward cant, which is exactly what you want when you're stretching a .308, 6.5 Creedmoor, or similar cartridge out past 500 yards. That angle tilts your scope down toward the barrel so you have to dial your reticle back up, which frees up a healthy chunk of extra elevation travel in your turret. The real-world difference is significant. More than one shooter has gone from maybe 40 MOA of usable adjustment to roughly 60 after mounting one of these, enough to reach well past 1,000 yards without bottoming out.
What the Steel HD Savage Base Fits
This base is made specifically for Savage short action receivers with a ROUND rear bridge and an AccuTrigger, covering the Model 10, 11, 12, 14, 16, and short action 110. It also fits the Stevens Model 200 short action with a round rear receiver. It will not work on flat-back Savages, the Axis or Axis II, the Edge, or the Model 25, so take a quick look at the shape of your rear receiver before ordering. The center spread runs 3.93 inches, overall length is 6.670 inches, and it tips the scale right around 2.5 ounces.
Mounting the Savage 10-16 Round Back Rail
Installation is about as straightforward as it gets. The rail comes drilled for larger diameter screws and ships with both #6-48 and #8-40 Torx hardware plus a T-10 bit, so you're covered whether your receiver uses standard or heavy-duty screws. EGW recommends torquing the screws to 20 inch-pounds with a drop of blue Loctite to keep everything locked in under recoil. Full-length Picatinny cross slots give you plenty of room to position your rings for proper eye relief, and the base accepts both Picatinny and Weaver rings. Feedback from owners is consistently strong on fit and finish, with the holes lining up clean and the whole thing feeling solid as a rock once it's buttoned down.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 86202
- UPC: 841370109609
- Material: Solid Steel
- Finish: Matte Black Hardcoat
- Elevation: 20 MOA
- Action Length: Short Action
- Receiver Fit: Round Rear Receiver (AccuTrigger)
- Rail Type: One-Piece Picatinny
- Center Spread: 3.93 in
- Overall Length: 6.670 in
- Height: 0.35 in (receiver to top of rail)
- Weight: 2.5 oz
- Ring Compatibility: Picatinny or Weaver
- Torque Spec: 20 in/lbs
- Color: Black
What’s Included
- Steel HD Savage round back short action Picatinny rail (20 MOA)
- #6-48 x 1/4 in Torx mounting screws
- #8-40 x 1/4 in Torx mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW base fit my Savage rifle?
It's built for Savage short action models 10, 11, 12, 14, 16, and the short action 110 that have a ROUND rear receiver and an AccuTrigger. It also fits the Stevens Model 200 short action with a round rear receiver. It will not fit flat-back Savages, the Axis, Axis II, Edge, or Model 25, so check the shape of your rear receiver before you order.
Does it come with the screws I need, and which size do I use?
Yes, it ships with both #6-48 and #8-40 Torx screws plus a T-10 bit, so you're covered either way. Most standard receivers use the #6 screws, while heavy-duty and magnum/target receivers use the larger #8 screws. If you're not sure, back out one of your factory screws and measure it, or just test-fit the included hardware by hand.
What does the 20 MOA do for me?
The 20 MOA tilts the scope slightly downward toward the barrel, which forces you to dial your reticle back up and frees up extra elevation travel in your turret. That's what lets you reach out to longer distances without running out of adjustment. EGW suggests the 20 MOA option for shooting roughly 500 to 1,000 yards, and recommends zeroing at 200 yards with this base.
Is the steel version worth it over the aluminum one?
The steel HD base is machined from solid steel with a hardcoat finish, so it's a bit heavier and about as rugged as a one-piece rail gets. If you're building a dedicated long-range or tactical setup and want maximum rigidity, the steel is a nice touch. For lighter hunting builds where ounces matter, the aluminum version does the same job at less weight.




Reviews
There are no reviews yet.