Description
EGW built this Heavy Duty rail to give the Remington XP-100 family a modern optics platform without you having to reinvent the wheel. It's a one-piece Picatinny base cut from solid 7075 T6 aircraft grade aluminum and finished in a matte black hardcoat, which means it shrugs off recoil and holds zero far better than a pair of two-piece bases ever could. The 0 MOA cant keeps the rail level with the action, which is exactly what you want for short to mid range work out to roughly 500 yards.
Fitment for the 4-Hole XP-100, XR-100, and Model 7
This is the 4-hole version, drilled to match the factory scope mount holes on newer receivers. It covers the Remington XP-100, XR-100, and the short action Model 7, and it's a known fit for the Model 673 Guide Gun as well. The older three-hole receivers use a different base, so take a second to count your holes and measure the spacing before ordering. The center spread on this rail runs 3.351 inches with an overall length of 5.488 inches.
Why the HD Rail Holds Its Own
The full-length Picatinny cross slots are gauged to MIL-STD 1913 specs within plus or minus .002 inches, so your rings clamp exactly where they should and you've got real flexibility to dial in eye relief. The Heavy Duty profile sits lower than EGW's lightweight rails, which trims weight and keeps your optic closer to the bore line for a cleaner cheek weld. A center channel lightens things up without giving away any rigidity, and the bevels on both sides make it fully ambidextrous.
Getting Your EGW Rail Mounted
Installation is straightforward. The rail accepts any Picatinny or Weaver scope rings, and EGW includes the #6-48 screws and a T-10 bit to get it done. Torque the screws to 20 inch-pounds and add a small drop of blue thread locker to keep everything put under repeated firing. From there you're just a scope and rings away from being ready for the range.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 80230
- UPC: 841370108978
- Model: Remington XP-100 / XR-100 / Model 7 (4-Hole)
- Rail Type: One-Piece Picatinny
- Hole Pattern: 4-Hole
- Cant / MOA: 0 MOA
- Material: 7075 T6 Aircraft Grade Aluminum
- Finish: Matte Black Hardcoat Anodized
- Center Spread: 3.351 in
- Overall Length: 5.488 in
- Height: .35 in (top of receiver to top of Picatinny)
- Weight: 2.5 oz
- Ambidextrous: Yes
- Ring Compatibility: Picatinny or Weaver
- Made In: USA
What’s Included
- One-piece Picatinny scope rail
- #6-48 x 1/4 mounting screws
- T-10 Torx bit
Frequently Asked Questions
Will this EGW rail fit my Remington XP-100 or Model 7?
This is the 4-hole version, which fits newer Remington XP-100, XR-100, and short action Model 7 receivers, along with the Model 673 Guide Gun. Older guns with a three-hole pattern use a different base. Count your receiver holes and check the hole spacing against the 3.351 inch center spread before ordering to be sure.
What does the 0 MOA cant mean for shooting distance?
A 0 MOA rail sits perfectly level with the action, with no built-in elevation. That makes it ideal for short to mid range shooting out to around 500 yards. If you were planning to stretch things out past that, a 20 MOA base would give your scope more elevation to work with.
Does the rail come with everything I need to mount it?
Yes. EGW includes the #6-48 screws and a T-10 Torx bit to get the rail on the receiver. You'll just need to supply your own Picatinny or Weaver scope rings and an optic. A drop of blue thread locker is recommended, though it's sold separately.
How should I install and torque this rail?
The rail bolts directly to the factory scope mount holes on your receiver. EGW recommends torquing the screws to 20 inch-pounds and adding a small drop of blue thread locker to each one to keep them from backing out under recoil. Take your time and make sure the base is seated flat before snugging everything down.





Reviews
There are no reviews yet.