0
0

EGW Novak Cut Sight Mount for Vortex Viper/Venom Fits 1911 Black

UPC: 841370107117

$44.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Want a red dot on your 1911 but you're not ready to send the slide off for milling? This is the clean middle ground. The EGW Novak Cut Sight Mount replaces your factory rear sight and gives you a stable platform for a micro red dot, no permanent machining to the slide required. It's cut specifically for genuine Novak rear sight dovetails, which show up on a huge range of 1911-style pistols along with models from Taurus, Smith & Wesson, Remington, Ruger, and Colt.

The plate is machined from 7075 aluminum and finished in a matte black Type III hardcoat anodize, so it shrugs off holster wear and the general abuse that comes with carry and range time. Overall length runs about 1.81 inches, and it keeps the optic lower than you'd get with a bulky Picatinny rail adapter, which helps with a cleaner sight picture and a more natural presentation. It's built right here in the USA.

What the Novak Cut Mount Fits

This one covers a wide optic footprint. It accepts Vortex Viper and Venom, Burris FastFire 1 through 4, Docter, and other sights sharing that same footprint. The key thing to confirm before ordering is that your slide has a genuine Novak rear sight cut. If you've got that, you're in business.

Installing Your EGW Sight Mount

This is a press-fit dovetail mount, so a sight pusher tool makes life a lot easier when you knock out the old rear sight and seat the new plate. EGW designs the dovetail with a progressive taper and installs left to right with the muzzle forward. Once the plate is seated and the set screw snugged, you mount your optic with the correct screws, add a dab of blue Loctite, and torque to 15 in/lbs. Button head screws are included for the Vortex optics and flat head screws for the Burris and Docter sights. A 5/64 inch Allen wrench handles the hardware. Depending on your specific slide, a little minor fitting may be part of the process, which is normal for dovetail-mounted plates and well worth it for a tight, repeatable fit.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49311
  • UPC: 841370107117
  • Color: Black
  • Finish: Matte Black Type III Hardcoat Anodize
  • Material: 7075 Aluminum
  • Mount Type: Press Fit Dovetail
  • Dovetail Cut: Novak Rear Sight Cut
  • Optic Compatibility: Vortex Viper, Vortex Venom, Burris FastFire 1-4, Docter
  • Overall Length: 1.811 in
  • Overall Width: .99 in
  • Dovetail Width: .500 in
  • Torque Spec: 15 in/lbs
  • Hardware Wrench: 5/64 in Allen
  • Country of Origin: USA

What’s Included

  • EGW Novak cut sight mount plate
  • 2 button head cap screws (for Vortex Viper and Venom)
  • 2 flat head cap screws (for Burris FastFire and Docter)
  • 1 set screw

Frequently Asked Questions

Will this Novak cut sight mount fit my pistol?

It's made for slides with a genuine Novak rear sight cut, which covers a huge number of 1911-style pistols plus models from Taurus, Smith & Wesson, Remington, Ruger, and Colt. Before ordering, confirm your slide actually has a true Novak dovetail. If you're not sure, a quick check against your pistol's rear sight cut specs or a call to the maker will clear it up.

Which red dot optics does this mount work with?

It accepts the Vortex Viper and Venom, Burris FastFire 1 through 4, and Docter sights, along with other optics that share that same footprint. The kit comes with the right screws for each type, button head for the Vortex and flat head for the Burris and Docter. Just use the hardware that matches your optic and you're set.

Do I have to mill my slide to use this mount?

No. The whole point of this plate is to skip permanent slide machining. You remove your factory rear sight and press the EGW mount into the existing dovetail, so your slide stays unaltered and you still get a solid red dot platform.

How hard is it to install the EGW sight mount?

It's a press-fit dovetail, so a sight pusher tool makes the job much smoother when removing the old sight and seating the plate. You install it left to right with the muzzle forward, snug the set screw, mount the optic with blue Loctite, and torque to 15 in/lbs using a 5/64 inch Allen wrench. Some slides may need a bit of minor fitting, which is normal, so if you're not comfortable doing it yourself a gunsmith can knock it out quickly.

Additional information

UPC

841370107117

Manufacturer

Manufacturer Part Number

49311

Color

Black

Reviews

There are no reviews yet.

Be the first to review “EGW Novak Cut Sight Mount for Vortex Viper/Venom Fits 1911 Black”