0
0

EGW T/C Contender 0 MOA Picatinny Scope Base – 46800 Matte Black

UPC: 841370106714

$27.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A quality scope base is one of those parts you only think about when it fails, which is why starting with the right foundation matters. This EGW 0 MOA Picatinny rail is built specifically for the Thompson/Center Contender and G2, giving you a flat, true mounting surface that holds your optic steady shot after shot. It uses a four-hole standard mounting pattern that lines up to any Contender or G2 barrel, and the full-length cross slots let you slide your rings fore and aft to dial in eye relief exactly where you want it.

Why the Contender 0 MOA Base Earns Its Keep

The 0 MOA flat profile keeps your scope near its mechanical center, which makes zeroing simple at common distances. For most hunting and target work inside roughly 500 yards, this is the setup you want since it leaves plenty of adjustment travel in both directions. If you're planning to reach way out past that, the 20 MOA version exists for dedicated long-range dialing, but for the vast majority of Contender shooters the flat base is the practical pick.

Built Tough, Built in the USA

EGW machines this rail from domestic 6061 T6 extruded aluminum on their own CNC centers, then tumbles, sandblasts, and Type II anodizes it in matte black for a finish that shrugs off wear. The center channel trims weight down to a couple ounces without giving up rigidity, and the overall length runs about 5.488 inches with a center spread of .838 inches. It sits around 0.4 inches high, and in many cases it won't block your factory iron sights.

What You Need to Know Before Mounting

The base ships with hex head screws and a wrench, so you've got everything to get it on the barrel. EGW suggests torquing the screws to about 20 inch pounds with a drop of blue Loctite for a mount that stays put. One thing worth noting: the Contender base is unique to the Contender and G2, and it won't swap over with the Encore pattern since those barrels have a slightly different diameter at the mounting location.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN / Model: 46800
  • UPC: 841370106714
  • Fits: Thompson/Center Contender and G2 barrels
  • Cant: 0 MOA (flat)
  • Rail Type: One Piece Picatinny / Weaver
  • Material: 6061 T6 Extruded Aluminum
  • Finish: Matte Black Type II Anodized
  • Overall Length: 5.488 in
  • Center Spread: .838 in
  • Height: Approximately 0.4 in
  • Weight: Approximately 2 to 3 oz
  • Mounting Pattern: 4-hole standard
  • Color: Black
  • Made In: USA

What’s Included

  • EGW T/C Contender 0 MOA Picatinny scope base
  • Hex head mounting screws (4)
  • Hex wrench

Frequently Asked Questions

Will this EGW base fit both Contender pistols and rifles?

Yes. This mount is made specifically for the Thompson/Center Contender and G2, and it works on both pistol and rifle barrels using the four-hole standard pattern. As long as your barrel is drilled and tapped, it should line right up.

Should I get the 0 MOA or the 20 MOA Contender base?

The 0 MOA flat base is the right choice for most hunting and target shooting inside roughly 500 yards, since it keeps your scope near its mechanical center for easy zeroing. The 20 MOA version adds built-in elevation bias to preserve turret travel for dedicated long-range dialing. For the majority of Contender setups, the 0 MOA is the practical pick.

What rings do I need for this Picatinny base?

This is a Picatinny-style rail, so it accepts both Picatinny and Weaver-style scope rings. The full-length cross slots let you position your rings to set eye relief, so just match the ring height to your scope's objective diameter.

Does the Contender base come with mounting hardware?

It does. The base ships with hex head screws and a wrench to get it installed. EGW recommends torquing to about 20 inch pounds with a drop of blue Loctite so it stays locked in under recoil.

Additional information

UPC

841370106714

Manufacturer

Manufacturer Part Number

46800

Action

Color

Black

Length

9.0500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW T/C Contender 0 MOA Picatinny Scope Base – 46800 Matte Black”