Description
If you've been fighting with factory two-piece bases or just want a cleaner platform for your glass, this EGW rail is one of the easiest upgrades you can make to a round back Savage. It's a one-piece Picatinny base machined from domestic 6061 T6 aluminum and finished in a matte black anodize, giving you a rigid, repeatable surface to clamp your rings down on. The full-length cross slots run the whole length of the rail, so you've got plenty of room to slide your rings forward or back and dial in proper eye relief no matter what scope you're running.
What the EGW Savage Round Back Long Action Rail Fits
This base is cut for the ROUND rear receiver long actions, which covers the Savage 110, 111, 112, 114, and 116, along with the Stevens Model 200. It works with any long action round back Savage that has an ejection port and an AccuTrigger-era receiver. It does not fit the older flat back Savages, the Axis or Axis II, the Model 25, or the Savage 212 slug gun, so it's worth confirming your receiver shape before you order.
Zero MOA and Why It Matters on This Savage Rail
This is a flat 0 MOA base, meaning there's no built-in forward cant. That makes it the right pick for general hunting and target work inside roughly 500 yards, where you want your scope's internal adjustment centered rather than leaning on built-in elevation. If you're chasing extreme long range past that, a 20 MOA base is the better route, but for most .30-06, .308, and magnum hunting setups the 0 MOA keeps things simple and dead-on.
Build Quality and Mounting
The center channel cuts weight down to around 2 ounces and, on a lot of rifles, won't block your factory iron sights. The rail is beveled on both sides, so it's fully ambidextrous. EGW recommends torquing the screws to 20 in/lbs with a drop of blue Loctite. These mounts are proudly made in the USA and machined on-site, which is a big part of why they've earned such a loyal following with Savage owners.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 41100
- UPC: 841370105472
- Rail Type: One-Piece Picatinny (Weaver ring compatible)
- Fits: Savage 110, 111, 112, 114, 116 & Stevens 200 Round Back Long Action
- MOA: 0 MOA
- Material: Domestic 6061 T6 Aluminum
- Finish: Matte Black Anodize
- Color: Black
- Overall Length: 7.458 in
- Center Spread: 4.630 in (center-to-center of middle holes)
- Height: 0.4 in (top of receiver to top of rail)
- Weight: Approx. 2 oz
- Handedness: Ambidextrous (beveled both sides)
- Torque Spec: 20 in/lbs (blue Loctite recommended)
- Made In: USA
What’s Included
- EGW Savage Round Back Long Action 0 MOA Picatinny rail
- 4x #6-48 mounting screws
- 4x #8-40 mounting screws
- T-10 Torx bit
Frequently Asked Questions
Which Savage models does this EGW round back long action rail fit?
It fits the round rear receiver long action Savages, including the Model 110, 111, 112, 114, and 116, as well as the Stevens Model 200. It works with any long action round back Savage that has an ejection port and an AccuTrigger-style receiver. It does not fit flat back receivers, the Axis or Axis II, the Model 25, or the Savage 212 slug gun.
How do I know if I need the 0 MOA or a 20 MOA version?
The 0 MOA base is a flat mount with no built-in elevation, which is ideal for general hunting and target shooting inside roughly 500 yards. If you plan on stretching out past that into extended long range, a 20 MOA base gives you more usable elevation in your scope. For most standard Savage hunting rifles, the 0 MOA keeps your optic's adjustment centered and simple.
Does this Savage Picatinny rail come with the screws I need?
Yes. It ships with both #6-48 and #8-40 screw sets plus a T-10 Torx bit, so you're covered whether your receiver is drilled for the smaller or larger screws. Savage changed which screw size they used over the years, so it's smart to pull and measure one of your existing screws before install. EGW recommends torquing to 20 in/lbs with a drop of blue Loctite.
What type of scope rings work with this EGW base?
It's a true Picatinny-style base, so it accepts both Picatinny and Weaver style rings. The full-length cross slots give you a lot of room to position your rings for proper eye relief no matter the scope. That flexibility makes it easy to set up everything from a compact hunting optic to a longer precision scope.





Reviews
There are no reviews yet.