0
0

EGW Remington 788 Standard Action Picatinny Rail Scope Base 0 MOA

UPC: 841370105229

$36.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Finding a quality scope base for the Remington 788 isn't easy these days, which is exactly why this EGW rail is such a find. It's a one-piece Picatinny base machined specifically for the 788 standard action, so it bolts right onto the factory mounting holes and gives your optic the stable, repeatable foundation it needs. The cross slots run the full length of the rail, meaning you've got plenty of room to slide your rings fore and aft to dial in eye relief no matter what scope you're running.

Why the Remington 788 Rail Fits So Well

EGW makes this base model-specific rather than one-size-fits-most. The middle spread, measured center to center between the two middle receiver holes, comes in at 3.00 inches on the standard action version. It's cut from domestic 6061 T6 extruded aluminum and wears a matte black anodized finish that holds up to field use and blends in nicely. A channel milled down the center keeps the weight down to right around two ounces, so you're adding almost nothing to the gun.

Fitment Notes for the 788 Standard Action 0 MOA Base

This is the 0 MOA version, which is the one you want for general hunting and shooting inside roughly 500 yards. It's built for Remington 788 standard actions chambered in .222, .223, .22-250, and .30-30. It is not made for .308, .243, 6mm, or 7mm-08 actions, so it's worth confirming your caliber before ordering. A quick measurement of your receiver hole spacing against the published dimensions is a smart habit, and EGW recommends it.

What Makes This a Solid Upgrade

The base comes standard with a bevel on both sides, so it works equally well for right or left handed setups. It accepts any standard Picatinny or Weaver rings, giving you nearly unlimited choice in optics. Hardware is included in the box, torque the screws to spec, and you've got a dependable platform ready for whatever glass you're mounting.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 40400
  • UPC: 841370105229
  • Fits Model: Remington 788 Standard Action
  • MOA / Cant: 0 MOA
  • Rail Type: One-Piece Picatinny
  • Material: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodized
  • Center / Middle Spread: 3.00 in
  • Overall Length: 5.882 in
  • Height (receiver to rail top): 0.4 in
  • Weight: Approx. 2 oz
  • Mounting Screws: #8-40 x 1/4
  • Torque Spec: 20 in/lbs
  • Ambidextrous: Yes (beveled both sides)
  • Made In: USA

What’s Included

  • One-piece Picatinny scope base
  • Mounting screws (#8-40 x 1/4)
  • Torx T-10 bit

Frequently Asked Questions

Which Remington 788 calibers does this base fit?

This is the standard action version, built for Remington 788 rifles chambered in .222, .223, .22-250, and .30-30. It is not made for .308, .243, 6mm, or 7mm-08, which use the long action. If you're unsure, measure the center-to-center spacing of your two middle receiver holes, which should be 3.00 inches on the standard action.

Does the Remington 788 Picatinny rail come with rings?

No, rings are not included with this base. It accepts any standard MIL-STD 1913 Picatinny or Weaver scope rings, so you can pair it with whatever rings match your optic's tube diameter and height needs. The mounting hardware for the base itself, screws and a Torx bit, does come in the box.

What is the difference between the 0 MOA and 20 MOA version?

The 0 MOA base, which is this one, sits flat with no built-in forward cant and is ideal for general hunting and shooting out to around 500 yards. A 20 MOA base adds elevation built into the rail for long range work past 500 yards. For most 788 setups the 0 MOA is the right call.

Do I need to drill or tap my Remington 788 to install this?

No drilling or tapping required. The rail is drilled to line up with the factory scope mount holes on the 788 receiver, so it's a direct bolt-on job. Just torque the included screws to the recommended 20 in/lbs and you're set.

Additional information

UPC

841370105229

Manufacturer

Manufacturer Part Number

40400

Action

Color

Black

Length

8.9500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Remington 788 Standard Action Picatinny Rail Scope Base 0 MOA”