0
0

EGW Remington 541 Picatinny Rail Scope Mount 0 MOA – 40310

UPC: 841370105205

$35.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Remington 541 is a great old rimfire, but its factory scope base holes sit close together and don't give you much to work with. This EGW one-piece Picatinny rail fixes that by replacing the short factory setup with a full-length base that runs cross slots end to end, so you can slide your rings around and dial in eye relief exactly how you like it. It's machined specifically for the 541, not a universal part forced to fit, which is why it sits tight and clean on the receiver.

Why the EGW 541 Rail Beats a Two-Piece Setup

Going with a single solid piece of 6061-T6 aluminum means there's no chance of two separate bases sitting out of alignment with each other. Everything references off one part, so your rings line up true and your scope stays put under repeated shooting. The matte black Type II anodized finish shrugs off handling and keeps a low-key look that pairs well with a classic blued rimfire or a modern optic alike.

Fit and Specs on the Remington 541 Picatinny Mount

This base carries a center spread of 3.708 inches and an overall length of 6.276 inches, sitting about 0.4 inches from the top of the receiver to the top of the rail. It tips the scale right around 2 ounces, so you're not adding meaningful weight to a light-handling rifle. The 0 MOA cant is the right call for typical rimfire ranges, giving you a flat, true platform for plinking, small game, and target work out to a few hundred yards. Worth noting this rail is made for the 541 specifically and will not fit the Browning T-Bolt.

Getting the 541 Scope Base Installed

Installation is straightforward. The rail comes with #6-48 x 1/4 screws and a T-10 bit, and EGW recommends torquing to 20 inch-pounds with a drop of blue thread locker to keep things honest over time. Since it's a true Picatinny profile, you can run any Picatinny or Weaver rings you already own, which opens up a huge range of optic options for a rifle that was never designed around modern glass.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 40310
  • Model: Remington 541
  • UPC: 841370105205
  • Rail Type: One-Piece Picatinny
  • Cant: 0 MOA
  • Material: 6061-T6 Extruded Aluminum
  • Finish: Matte Black Type II Anodizing
  • Color: Black
  • Center Spread: 3.708 in
  • Overall Length: 6.276 in
  • Height: 0.4 in (top of receiver to top of rail)
  • Weight: 2 oz
  • Ambidextrous: Yes
  • Torque Spec: 20 in/lbs
  • Quick Disconnect Ring Compatible: No

What’s Included

  • EGW Remington 541 Picatinny rail (0 MOA)
  • #6-48 x 1/4 mounting screws
  • T-10 bit

Frequently Asked Questions

What rings work with the EGW Remington 541 Picatinny rail?

This is a true Picatinny-profile base, so it accepts any Picatinny or Weaver scope rings. That gives you a wide range of height and style options depending on your scope's tube diameter and objective size. Pick your rings based on the glass you plan to run.

Does this rail have any cant built in?

No, this is the 0 MOA version, meaning it sits flat with no forward slope. That's the right choice for the ranges most 541 shooters work, from plinking and small game out to a few hundred yards. If you were stretching things way out to long range you'd want the 20 MOA version instead.

What hardware do I need to install the Remington 541 mount?

Everything needed comes in the box, including the #6-48 x 1/4 screws and a T-10 bit. EGW recommends torquing the base to 20 inch-pounds and adding a drop of blue thread locker to keep the screws from backing out. A proper torque driver is a good idea so you don't over-tighten.

Will this rail fit other rifles besides the Remington 541?

This base is machined specifically for the Remington 541 receiver and its hole spacing. It will not fit the Browning T-Bolt or other models. If you have a different Remington rimfire, check EGW's lineup for the correct base matched to your receiver.

Additional information

UPC

841370105205

Manufacturer

Manufacturer Part Number

40310

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Remington 541 Picatinny Rail Scope Mount 0 MOA – 40310”