0
0

EGW REM 700, 722, 40X Short Action 20 MOA Picatinny Rail (40002)

UPC: 841370104994

$36.00

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're building out a Remington 700 short action for long range or just want a solid, no-nonsense scope base, this EGW 20 MOA Picatinny rail is one of the easiest upgrades you can make. It's a one-piece rail precision machined from domestic 6061-T6 extruded aluminum, finished in matte black anodizing, and built to drop onto your receiver's factory scope holes. The 20 MOA of built-in cant tilts your optic forward, which buys back elevation travel inside your scope so you can dial out to distance without running out of adjustment.

What the EGW 40002 Rail Fits

This short action base covers a wide spread of rifles. It's made for the Remington 700, 722, and 40X short actions, and also fits the Remington 700 Ultimate Muzzleloader, Bergara B14 (#6 screws), CVA Paramount and Paramount Pro, and Christensen Arms short actions. EGW ships it with both #6-48 and #8-40 screws plus a T-10 bit, since the rail comes pre-drilled to accept either screw size, so you've got the right hardware in the box for most setups. Worth noting: this standard-height rail sits too low for the Remington 700 PCR and CP models, which need a taller mount.

Setting Up Your Short Action Picatinny Rail

Installation is straightforward. EGW recommends torquing the screws to 20 inch-pounds and running a drop of blue Loctite to keep everything locked in under recoil. The full-length Picatinny cross slots give you plenty of room to position rings for proper eye relief, and it plays nice with any standard Picatinny or Weaver-style rings. A milled center channel trims the weight down to right around 2 ounces, so you're adding rigidity without hanging dead weight off the top of your rifle.

Why Folks Reach for the EGW 20 MOA Base

EGW has a reputation for turning out rails that fit right and hold up, and this one is no different. The 20 MOA angle is the sweet spot for reaching out past 500 yards, and the ambidextrous design works no matter how your rifle is set up. For a straightforward, American-made base that does its job and gets out of the way, it's hard to beat.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 40002
  • UPC: 841370104994
  • Model: 700 / 722 / 40X Short Action
  • Style: One-Piece Picatinny Rail
  • Elevation: 20 MOA
  • Material: 6061-T6 Extruded Aluminum
  • Finish: Matte Black Anodized
  • Center Spread: 3.627 in
  • Height: Approx. 0.4 in (receiver top to rail top)
  • Weight: Approx. 2 oz
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny / Weaver
  • Recommended Torque: 20 in-lbs
  • Country of Origin: USA

What’s Included

  • One-piece 20 MOA Picatinny rail
  • #6-48 mounting screws
  • #8-40 mounting screws
  • T-10 bit

Frequently Asked Questions

What rifles does the EGW 40002 short action rail fit?

It's built for the Remington 700, 722, and 40X short actions, along with the Remington 700 Ultimate Muzzleloader. It also fits the Bergara B14 (#6 screws), CVA Paramount and Paramount Pro, and Christensen Arms short actions. Keep in mind this standard-height rail sits too low for the Remington 700 PCR and CP models.

Why would I choose a 20 MOA rail over a flat 0 MOA base?

The 20 MOA cant tilts your scope forward slightly, which gives back elevation adjustment inside the optic so you have more room to dial for distance. It's the go-to choice when you're shooting past 500 yards. A 0 MOA base is better suited if you're staying inside a few hundred yards.

Does the rail come with the screws and tools to install it?

Yes. It ships with both #6-48 and #8-40 screws plus a T-10 bit, and the rail is pre-drilled to take either screw size. EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite for a secure hold under recoil.

What kind of scope rings do I need for this base?

This is a standard MIL-STD 1913 Picatinny rail, so it works with any Picatinny or Weaver-style rings. The full-length cross slots give you flexibility to position your rings for the right eye relief. Rings are not included, so you'll want to pick those up separately.

Additional information

UPC

841370104994

Manufacturer

Manufacturer Part Number

40002

Action

Color

Black

Length

8.4000

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW REM 700, 722, 40X Short Action 20 MOA Picatinny Rail (40002)”