Description
Faxon built this one for the PCC crowd, and it shows. The Duty Series 16" 9mm barrel is set up for straight blowback AR-9 builds, so there's no gas port to worry about and no gas system to tune. You just need a barrel that feeds clean, holds zero, and stays light on the front end, and that's exactly the lane this one runs in.
Start with the material. It's cut from 4150 CMV steel, the same military-grade stuff you want for heat tolerance during long range sessions, then treated with nitride inside and out for deep corrosion and wear resistance. Faxon runs these barrels through their in-house process in Cincinnati, including stress relieving, air-gauge testing, and an 11-degree target crown for consistent accuracy. Each one gets headspace checked with hardened gauges before it ships, which is the kind of quality control that gives you confidence dropping it into a build.
What the Light Taper Profile Brings to a 9mm Build
The light tapered profile is the star here. On a pistol caliber carbine you don't need a heavy bull barrel soaking up recoil that barely exists, so Faxon trimmed the weight where it counts. The result is a nimble, well-balanced front end that points fast and carries easy, while still keeping enough meat for rigidity and repeatable groups. If you've handled a chunky AR-9 and wished it swung quicker, this profile is the fix.
Fitting the Duty Series 16" 9mm Barrel to Your Setup
Compatibility is wide open. The feed ramps work with both Glock-pattern and Colt-pattern AR-9 receivers, so it plays nice across most common configurations. The muzzle is threaded 1/2×28, giving you the standard interface for a brake, flash hider, or a can down the road. With a 1:10 twist it stabilizes the full range of 9mm bullet weights you're likely to run, from light plinking loads to heavier defensive stuff. Whether this is your first AR-9 or an upgrade to a rifle you already shoot, it's a dependable foundation to build around.
Key Specifications
- Manufacturer: Faxon Firearms
- MPN: 15A910N16NLQ
- UPC: 816341020801
- Caliber: 9mm Luger (SAAMI)
- Barrel Length: 16"
- Twist Rate: 1:10
- Profile: Light Tapered / Pistol Caliber Taper
- Barrel Material: 4150 CMV Steel
- Finish: QPQ Nitride (inside and out)
- Rifling: Button Rifled
- Muzzle Thread: 1/2×28
- Crown: 11-Degree Target Crown
- Gas Port: None (blowback)
- Feed Ramp Compatibility: Glock & Colt Pattern
- Country of Origin: USA (Cincinnati, Ohio)
What’s Included
- Faxon Duty Series 16" 9mm AR-15 barrel
Frequently Asked Questions
Does the Faxon 16" 9mm barrel work with both Glock and Colt magazine platforms?
The barrel itself has feed ramps machined to work with both Glock-pattern and Colt-pattern AR-9 receivers. Magazine compatibility ultimately comes down to your lower and magwell setup, but this barrel won't be the limiting factor. That flexibility is one of the reasons it fits so many common AR-9 builds.
Why doesn't this Faxon Duty Series barrel have a gas port?
AR-9 pistol caliber carbines run on straight blowback operation rather than a gas system, so there's no need for a gas port. That keeps things simple and reliable with no gas tuning required. You just add a blowback bolt carrier group and the rest of your build.
What muzzle devices will fit this barrel?
The muzzle is threaded 1/2×28, which is the standard interface for 9mm and .223/5.56 devices. That means you can run most common brakes, flash hiders, compensators, or a suppressor mount without any adapters. It gives you plenty of options as your build evolves.
Is the 1:10 twist good for a range of 9mm loads?
Yes, a 1:10 twist is a versatile rate for 9mm and stabilizes the common bullet weights you'll run through a PCC. That covers everything from light target loads to heavier defensive ammo. It's a dependable all-around choice for a pistol caliber carbine.




Reviews
There are no reviews yet.