Description
Some parts just won't come clean no matter how long you scrub. Bolt carrier groups, suppressor baffles, gas pistons, and revolver cylinders all cook on carbon that laughs at everyday solvents. That's exactly the mess Slip 2000 built Carbon Killer to handle. This 32 oz jar is the brand's most aggressive cleaner, a water-based soak that breaks the bond between metal and the carbon, lead, and plastic fouling stuck to it. You drop the part in, walk away for a bit, then pull it out looking like new with barely any elbow grease.
How Carbon Killer Actually Works
The idea is simple: let chemistry do the scrubbing for you. Fully submerge your dirtiest parts and give them 5 to 15 minutes to soak. Heavy or neglected pieces might want a second dip and a light pass with a brush, but the buildup softens right up. For bores or anything too big to drop in the jar, saturate a patch or rag, lay it on the fouling, and let it sit a few minutes before wiping away. Rinsing under hot water works too. When you're done, always re-oil with a good lubricant so the bare metal stays protected.
What Sets This Jar Apart
Unlike a lot of harsh solvents, Carbon Killer is non-flammable, non-hazardous, and biodegradable, so it won't stink up the shop or flash off while you work. It carries a mild citrus scent and is safe to use indoors. Best of all, it's one of the few gun cleaners on the market you can reuse. The fluid keeps working even after it gets dirty, and stored in its sealed jar, one container gives you many cleanings before it's spent.
Where Carbon Killer Earns Its Keep
This stuff shines on AR-15 and M-16 bolts, AK piston parts, MP-5s, SAWs, revolver cylinders and forcing cones, compensators, muzzle devices, and suppressor cans. One thing worth knowing: it's meant for internal metal parts only. Because it's aggressive enough to strip carbon on contact, keep it off the exterior of your firearm since it can lift or damage some finishes. Used the right way, it turns your worst cleaning job into a soak-and-wipe.
Key Specifications
- Manufacturer: Slip 2000
- Manufacturer Part Number: 60109
- UPC: 815706001097
- Volume: 32 oz
- Type: Carbon, Lead & Plastic Fouling Remover
- Formula: Water-based, aggressive soak
- Container: Sealed jar (PET plastic)
- Reusable: Yes
- Non-Flammable: Yes
- Biodegradable: Yes
- Scent: Orange / citrus
- Intended Use: Internal metal parts only
What’s Included
- One 32 oz jar of Slip 2000 Carbon Killer
Frequently Asked Questions
What kind of parts is Slip 2000 Carbon Killer made for?
It's built for internal metal parts with heavy, baked-on carbon like AR bolts and bolt carrier groups, gas piston components, revolver cylinders and forcing cones, compensators, muzzle devices, and suppressor baffles. Just fully submerge the part and let it soak. Keep it off the outside of your firearm, since the formula is aggressive enough to affect some finishes.
How long do I soak parts in Carbon Killer?
For most parts, a soak of 5 to 15 minutes does the job, then you wipe, brush, or rinse them clean. Really neglected or heavily fouled pieces may need a second soak and a light pass with a brush. Rinsing under hot water afterward helps flush loosened residue out of tight spots.
Is Slip 2000 Carbon Killer really reusable?
Yes, and that's one of its best features. The fluid keeps dissolving carbon even after it gets dirty, so stored properly in its sealed jar, one container can be used again and again for many cleanings. A lot of folks pour the used fluid back in and get plenty more life out of it.
Do I need to oil parts after using Carbon Killer?
Yes. Since Carbon Killer strips the fouling right down to bare metal, you'll want to re-apply a quality lubricant once parts are clean and dry. This protects against corrosion and helps keep new carbon from bonding as easily. Pairing it with a Slip 2000 lubricant as a system cuts down your overall cleanup time.




Reviews
There are no reviews yet.