L.E. Wilson 6.5 PRC Bushing Full Length Sizing Die FLD-65PRC

Description

The L.E. Wilson 6.5 PRC Bushing Full Length Sizing Die is built for reloaders who want their brass sized just right instead of settling for whatever a fixed-diameter die hands them. In a single stroke it sizes the case body, bumps the shoulder back to set your headspace, deprimes the spent primer, and sizes the neck to the exact tension you choose with interchangeable bushings. That last part is the whole point here. By swapping bushings you can fine-tune bullet grip to match your brass and your load, which is where a lot of the consistency in precision 6.5 PRC loads comes from.

What Sets the Wilson 6.5 PRC Bushing Die Apart

Wilson machines this die from steel hardened to their own spec, which they rate as harder than a Grade 8 bolt, with stainless parts that hold up over a long reloading life. It skips the expander ball entirely, so the bushing does the neck work. That means less case stretch and less work-hardening, which translates to brass that lasts longer and stays truer. If your necks are turned or already fairly uniform in thickness, the bushing alone gives you clean, repeatable results. Some reloaders like to follow up with an expander mandrel as a final step, and this die plays nice with that workflow too.

Setup and Compatibility for the FLD-65PRC

This is a standard threaded die that spins into any normal 7/8"-14 reloading press, so it drops right into the gear you already own. It ships with an adjustable depth decapping rod and includes a spare decapping punch, a nice touch that keeps you running if you ever bend one. Pairing it with a Wilson Case Gage is the smart move for dialing in your shoulder bump and making sure you're not overworking your 6.5 PRC brass.

Keep in mind the bushings are sold separately, which lets you pick the exact size for your brass and bullet combination. A common starting point is measuring the neck of a loaded round and going about .002" under for a solid baseline neck tension.