Description
L.E. Wilson has been turning out precision reloading tools for decades, and this little punch carries that same no-nonsense reputation. It's built for reloaders who like to deprime their brass as a separate step rather than doing it inside a sizing die on the press. Drop a case over a matching decapping base, line up the punch, and a light tap drives the spent primer straight out. Simple, repeatable, and easy on your hands.
This is the ground pin version (part number PBP-G25), which uses the smaller .057 inch pin made for brass with tighter flash holes. That matters if you're running match-grade cases where a standard pin just won't fit. It covers a nice spread of popular rifle calibers including 25, .270, 6.5mm, and 7mm, so one punch handles a good chunk of a precision shooter's lineup.
Why the Ground Pin PBP-G25 Earns Bench Space
Plenty of handloaders prefer pulling primers before sizing or tumbling, and that's exactly what this tool is made for. Taking the primer out first lets you clean out the primer pocket and flash hole without gunk getting worked around. It also shines on crimped military brass that can be stubborn in a standard die setup. The punch is caliber specific and machined to tight tolerances so the pin tracks true every time.
Pairing Your Wilson Decapping Punch With a Base
Keep in mind this listing is for the punch only. You'll need a matching L.E. Wilson decapping base to use it, and those are sold separately. The two work as a set: the base supports the case head and gives the primer somewhere to drop, while the punch does the pushing. Both are made right here in the USA and built to hold up to years of steady bench work.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: PBP-G25
- UPC: 815145025807
- Caliber: 25 / .270 / 6.5mm / 7mm
- Pin Type: Ground Pin (.057 inch)
- Material: Stainless Steel
- Tool Type: Hand Decapping Punch (Punch Only)
- Base Required: Yes, sold separately
- Country of Origin: Made in USA
What’s Included
- One L.E. Wilson decapping punch (PBP-G25) with ground pin
Frequently Asked Questions
Does the L.E. Wilson decapping punch come with a base?
No, this listing is for the punch only. You'll need a matching L.E. Wilson decapping base to actually remove primers, and those are sold separately. The punch and base work together as a pair.
What's the difference between the ground pin and a standard pin?
The ground pin version uses a smaller .057 inch pin designed for brass with tighter flash holes, which is common on match-grade and precision cases. The standard pin is thicker and won't fit through those smaller flash holes. If you're loading premium brass, the ground pin is usually the one you want.
Which calibers does the PBP-G25 punch fit?
This punch covers 25 caliber, .270, 6.5mm, and 7mm cases. Wilson makes these punches caliber specific, so matching the punch to your cartridge family keeps everything lined up and running smooth.
Can I use this punch in my reloading press?
No, this is a hand tool meant to be used with a Wilson decapping base, not inside a press or die. Reloaders use it to deprime brass as a separate step, which is handy for cleaning primer pockets or prepping cases before tumbling.





Reviews
There are no reviews yet.