$199.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The American Rifle Company M-BRACE 30mm Medium Scope Rings are built for the person who cares just as much about how their scope mounts as what scope they're mounting. These rings run a 30mm bore with a medium 1.10" (28mm) height measured from the optical center line to the top of the rail, which is a solid middle-of-the-road height that clears most objective bells on a standard Picatinny setup. They're CNC machined from high-strength 7075 aluminum and anodized matte black, so corrosion resistance and durability are baked right in.
The thing folks notice first is the split-ring layout. Instead of fighting to keep your reticle straight while you snug things down, these rings hold the scope in place and let you seat it without the tube rolling on you. That means less canting, less swearing, and a cleaner install. Under heavy recoil they stay put without denting or marring the scope body, and the rail interface engages Picatinny slots precisely even on rails that run a little out of spec. The payoff is repeatable return-to-zero you can count on when you pull the optic and put it back.
Torque spec is 55 in-lbs (6.2 Nm) on both the scope clamp and the rail mount screws. These are single large-clamp rings rather than a stack of cap screws, so setup is quick once you have a good torque driver. Just make sure the pins seat evenly on both sides before you crank them down. If you're mounting an older or vintage scope with a thinner tube, starting lower around 40 in-lbs is the smart play to avoid putting a pinch on the tube.
They weigh in right around 6.9 oz for the pair with a ring width near 0.945", which keeps things trim without giving up any clamping strength. Proudly made in the USA, these are the kind of rings you buy once and forget about, because they just work.
These are designed to fit Picatinny (MIL-STD-1913) rails. The rail interface is built to engage the slots precisely, even on rails that run slightly out of spec, which is part of what gives these rings their strong return-to-zero. They are not made for Weaver-only or dovetail setups.
The medium height is 1.10" (28mm) measured from the optical center line to the top of the rail. That's a good general-purpose height that clears most standard objective bells on a flat-top rifle. If you're running a large objective scope, it's worth measuring your specific setup before ordering to confirm clearance.
American Rifle Company calls for 55 in-lbs (6.2 Nm) on both the scope clamp and the rail mount screws. Hitting that number matters, since under-torquing can let the scope shift under recoil. For older or thin-walled vintage scope tubes, starting around 40 in-lbs is the safer bet to avoid pinching the tube.
No, they're engineered with a non-marring grip that holds firm even under heavy recoil without indenting the scope body. The split-ring design also keeps your reticle from rolling while you seat and tighten the optic. That combination is why so many people trust them on hard-kicking rifles.
| UPC | 810094450076 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MB-R-30-28 |
| Style | PICATINNY |
You must be logged in to post a review.
Reviews
There are no reviews yet.