Description
Anybody who has fit a stock to an action knows the pain of cranking the factory guard screws in and out a dozen times just to check clearance. That is exactly the headache these Forster Stockmaker's Hand Screws were built to solve. Threaded 10×32 to match the Ruger 77 and MK II, they thread into the receiver so you can seat the barreled action, check your fit, pull it back out, and repeat as many times as it takes without wearing out your good screws or risking a slip that gouges fresh wood.
Why Stockmaker's Hand Screws Beat Fighting With Guard Screws
The screws are precision made and hardened, so they hold up to repeated trial fittings instead of galling or rounding off. Each one carries a 3-inch handle that gives you plenty of leverage to snug the action down by hand and back it out just as fast, no screwdriver required. When you are inletting a fresh stock or checking your bedding job, that speed adds up quick, and it keeps the action indexed properly in the stock every time you set it back in.
Getting the Most From Your Ruger 77 Fitting Set
These come as a matched pair, which is what you want since a rifle action pulls down at two points. They are a favorite for glass bedding work too, letting you clamp everything in place while the compound cures without tying up your original hardware. If your project involves custom bottom metal or a drop-box magazine, it is worth measuring your screw recess against the shaft before you dive in, since aftermarket parts don't always share the factory dimensions.
Bottom line, if you are doing serious stock work on a Ruger 77 or MK II, this is one of those quiet shop tools that pays for itself on the very first project and lives in your bench drawer for the next twenty years.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: SMRUGR
- UPC: 757253999482
- Fits: Ruger 77 / MK II
- Model Reference: 77 Mark II
- Thread Size: 10×32
- Handle Length: 3 in (7.6 cm)
- Material: Hardened, precision-machined steel
- Quantity: Set of 2 (sold in pairs)
- Use: Stock inletting and glass bedding
What’s Included
- 2 Forster Stockmaker's Hand Screws (matched pair, 10×32 thread, 3-inch handles)
Frequently Asked Questions
What do Forster Stockmaker's Hand Screws actually do?
They replace your factory guard screws during the fitting process so you can seat and remove the barreled action from the stock as many times as you need. The 3-inch handles let you tighten and loosen by hand, which speeds up inletting and bedding. Using them keeps your original screws and your stock free of wear and slip marks.
Will this set fit my Ruger MK II pistol?
This particular set is threaded 10×32 for the Ruger 77 and MK II rifle actions, and it is meant for stock fitting on a bolt rifle rather than pistol work. If you are working on a rifle project, these are the right screws. For any other action, Forster offers separate sets matched to different thread patterns.
Are these hand screws sold individually or as a pair?
They come as a matched pair, which is exactly what you want since a rifle action pulls down at two points. Buying the set means both fitting locations are covered from the start. They are only sold in pairs, not singly.
Can I use these for glass bedding as well as inletting?
Yes, they are a popular choice for bedding work because they hold the action in place while your compound cures without tying up your original hardware. Just double-check the shaft diameter against your screw recess if you are running custom bottom metal or a drop-box magazine, since aftermarket parts don't always match factory dimensions.





Reviews
There are no reviews yet.