0
0

Forster Ultra Micrometer Seater Die 6.5 Grendel – U00059

UPC: 757253999154

$118.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.5 Grendel and chasing the kind of consistency that shows up on paper, the Forster Ultra Micrometer Seater Die is one of those tools that pays for itself in peace of mind. It takes everything that made Forster's original Bench Rest seater a favorite among precision handloaders and adds a genuinely useful micrometer head on top. You seat a bullet, measure it, then dial the micrometer stem up or down to hit your exact length. No more guesswork, no more creeping up on your target length one quarter-turn at a time.

How the 6.5 Grendel Ultra Micrometer Die Keeps Rounds Straight

The heart of this die is its floating, close-fitting die chamber. Instead of only supporting the case rim like a lot of seaters, Forster's caliber-specific chamber captures the full outside diameter of the sized case and holds the bullet, case, and seating stem on one common axis through the entire stroke. That co-axial setup is what produces the straight, concentric rounds Forster dies are known for. It's a non-crimping design, so the bullet gets press-fit into alignment without any distortion to the case mouth.

Dialing In Seating Depth With the Ultra Micrometer

The micrometer adjusts in either direction and is marked in clear .001" gradations, with fine-tuning down to .0005" when you want to walk a bullet right up to the lands. The bright white index marks are easy to read even in a dim loading room, and once you find the sweet spot for a given bullet, you just write down the setting. Switch bullets and want to come back later? Dial it right back to your recorded number and you're loading again.

Forster builds these from quality steel, machined to tight tolerances and hand polished before and after heat treating for a smooth finish. The Cross Bolt die lock ring clamps the split ring shut rather than digging a set screw into the die threads, so your settings stay put. It threads into standard 7/8"-14 presses, making it an easy fit for most reloading benches. Made in the U.S.A.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 6.5mm Grendel
  • Die Type: Ultra Micrometer Bullet Seater Die
  • Adjustment Increments: Marked in .001", adjustable to .0005"
  • Seating Style: Non-crimping, straight-line (co-axial)
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Material: Hand-polished, heat-treated steel
  • Thread: 7/8"-14 (fits standard presses)
  • Country of Origin: United States
  • Manufacturer Part Number: U00059
  • UPC: 757253999154

What’s Included

  • One Forster Ultra Micrometer Seater Die
  • Forster Cross Bolt split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

Does the 6.5 Grendel Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It press-fits the bullet while holding the case and bullet in perfect alignment for straight, concentric rounds. If you need a crimp, you'd do that in a separate step with a dedicated crimp die.

Will this die fit my reloading press?

Yes, it uses the standard 7/8"-14 thread and adapts to most common single-stage and turret presses. Keep in mind the shell holder is not included, so you'll want the correct one for 6.5 Grendel's 7.62×39-based case head.

How precise is the micrometer adjustment on the Forster Ultra die?

The micrometer head is marked in clear .001" gradations and can be fine-tuned down to .0005" increments in either direction. That makes it easy to walk a bullet right up to the lands and repeat the exact setting later, which takes most of the trial and error out of load development.

Is this a full die set or just the seater?

This is the seater die only. If you're setting up a complete 6.5 Grendel loading process, you'll also want a full length sizing die to size and deprime your brass before seating.

Additional information

UPC

757253999154

Manufacturer

Manufacturer Part Number

U00059

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die 6.5 Grendel – U00059”