Description
Neck tension is one of those little details that separates good handloads from great ones, and a quality bushing is how you control it. This is the Forster .246 inch neck bushing (part number BUSH-246), a single bushing built for use in Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. It lets you size the outside of your case neck to an exact diameter instead of leaning on a one-size-fits-all expander, which means you get the grip you want on the bullet and tighter, more consistent ammo coming off the press.
What the Forster .246" Neck Bushing Does on the Bench
The bushing is what determines the finished inside neck diameter of your brass. A common starting point is to pick a bushing roughly .002 inch under what a loaded round measures at the neck, then fine-tune from there. If you're loading for a tight chamber or turning your necks, you may want to go smaller, while thicker, unturned brass sometimes calls for a larger size. Because Forster offers these in .001 inch increments, it's easy to stack a couple of sizes and settle on the neck tension your rifle shoots best.
Why the BUSH-246 Finish Matters
Forster heat treats and hones each bushing to the precise inside diameter stamped on it, then runs it through a cryogenic process that refines and tightens the surface of the steel. The payoff is a genuinely smooth sizing action that treats your necks gently and holds its dimensions over a long working life. Less friction on the neck means less runout, better concentricity, and rounds that chamber and group the way you'd hope.
One thing worth knowing before you order: this is sold as a single bushing, no die included, and it's designed specifically for Forster dies. It won't interchange with Redding or L.E. Wilson bushings, so pair it with your Forster setup and you're good to go. If you already know your target neck diameter, order by the inside diameter you need and you're set.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BUSH-246
- UPC: 757253998744
- Inside Diameter: .246 inch
- Material: Heat treated, cryogenically treated steel
- Type: Neck sizing bushing
- Compatibility: Forster Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies
- Available Increments: .001 inch
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Forster .246" neck bushing (BUSH-246)
Frequently Asked Questions
What dies does the Forster .246" neck bushing work with?
It's made for Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. It is not cross-compatible with Redding or L.E. Wilson bushings, so plan to run it with a Forster die. If you already own one of those dies, this bushing drops right in.
How do I pick the right bushing size?
A good rule of thumb is to measure a loaded round at the case neck and choose a bushing about .002 inch smaller than that measurement. From there you can adjust for your brass and chamber. Forster offers these in .001 inch increments, so many reloaders keep a few sizes on hand to fine-tune neck tension.
Does this come with the die, or is it just the bushing?
This is a single bushing only, sold separately from the die. You'll need a compatible Forster bushing die to use it. Order by the inside diameter you need, which in this case is .246 inch.
Why is the Forster bushing cryogenically treated?
Forster heat treats and hones each bushing to the exact inside diameter, then runs it through a cryogenic process that refines and tightens the surface of the steel. That extra step gives you a smoother sizing action and a longer service life. The smoother the bushing, the gentler it is on your case necks, which helps with consistency and runout.





Reviews
There are no reviews yet.