Description
The Forster Bushing Bump Neck Die for the 300 Winchester Magnum gives precision handloaders control over two things that matter most for a long magnum case: how much grip the neck puts on the bullet, and where the shoulder sits for proper headspace. It sizes the neck down and bumps the shoulder back in a single stroke without touching the body of the case, which keeps your brass concentric and cuts down on the work hardening that shortens case life. If you shoot a 300 Win Mag bolt gun and you're tired of sticky bolt lift from oversized brass, this is the kind of tool that earns its keep on the bench.
How the Bushing Bump Neck Die Works
Unlike a standard full-length die, this one uses interchangeable bushings to set your neck diameter, and the die itself handles the shoulder bump at the same time. Pick a bushing roughly .002 inch under what a loaded round measures at the neck, and you've got your bullet tension dialed. Bushings come in .001 inch increments, so you can fine-tune grip for everything from magazine-fed hunting loads to single-feed precision work. The die ships with a decapping assembly that has no expander ball, meaning your bushing choice alone determines the inside neck diameter, which is exactly what you want when you're chasing minimal runout.
Fit and Compatibility Notes for the 300 Win Mag Die
One thing worth knowing up front: this die only accepts Forster bushings. It will not take Redding, Wilson, or Hornady bushings, so plan your bushing purchase accordingly. The bushings are sold separately, which lets you buy only the sizes your chamber and brass actually need.
Forster Build Quality You Can Feel
Forster machines these from quality steel on precise lathes, heat treats them to a tough Rockwell hardness, then hand polishes the interior before and after for a smooth-as-silk sizing feel. Made in the USA, this die carries the reputation Forster has built over decades with bench rest and precision crowds. Good brass prep is where accurate loads start, and this die is a solid foundation for your 300 Win Mag reloading setup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BBD3651
- UPC: 757253996085
- Cartridge: 300 Winchester Magnum
- Die Type: Bushing Bump Neck Sizing Die
- Bushing Increments: .001 inch
- Bushing Compatibility: Forster bushings only
- Expander Ball: None (bushing sets neck ID)
- Decapping: Includes decapping assembly
- Country of Origin: USA
What’s Included
- One Forster Bushing Bump Neck Sizing Die (300 Winchester Magnum)
- Decapping assembly (no expander ball)
- Instructions
Frequently Asked Questions
Are bushings included with the 300 Win Mag Bushing Bump Neck Die?
No, this die ships without bushings, so you'll need to order them separately. Choose a bushing roughly .002 inch smaller than a loaded round measures at the neck for a good starting point on tension. Forster offers them in .001 inch increments so you can fine-tune from there.
Can I use Redding or Wilson bushings in this Forster die?
No. This die is built specifically for Forster bushings and will not accept Redding, Wilson, or Hornady bushings. They differ in dimensions, so stick with Forster bushings for this die.
What does the bushing bump die actually do to my 300 Win Mag brass?
It sizes the case neck down to set your bullet tension and bumps the shoulder back for correct headspace, all in one stroke. It does this without sizing the body of the case, which keeps your brass concentric and reduces the overworking that shortens case life. It also deprimes the case in the same operation.
Do I need a shellholder with this die on a Forster Co-Ax press?
No. If you're running a Forster Co-Ax press, no shellholder is required since those presses grip the case rim directly. On a standard threaded press you'll use the appropriate shellholder for the 300 Win Mag case head.




Reviews
There are no reviews yet.