Description
If you shoot the 280 Ackley Improved, you already know it rewards careful handloading, and this Forster full length sizing die is built to hold up its end of the deal. It handles the whole job in one stroke: it works the neck and body back down, sets your shoulder bump for proper headspace, knocks out the spent primer, and expands the case neck so it's ready for the next bullet. For hunters and target reloaders who want repeatable brass without fuss, this is the die most people reach for first.
What Sets the Forster 280 AI Sizing Die Apart
The heart of this die is Forster's elevated E-Z Out expander ball. Instead of sitting low in the case like a lot of designs, it's positioned higher up in the neck, so it supports and aligns the neck with the case axis as the brass is pulled back out. That little detail is a big reason Forster dies have a reputation for turning out concentric, true-running ammo load after load. The body is machined from quality steel to tight tolerances, then hand polished before and after heat treating for a smooth interior that's easy on your brass.
Fit, Threads, and the Cross Bolt Lock Ring
This die uses the standard 7/8-14 thread, so it drops into just about any common single stage or turret press, and it's right at home in a Forster Co-Ax. It comes topped with Forster's Cross Bolt Die Lock Ring, which clamps around the full ring and cinches the two ends together rather than digging a set screw straight into the die threads. The result is a more precise, repeatable lockup with no thread damage and no canting, and you only need a 7/64 hex key to adjust it.
Running the 280 Ackley Improved Die
The die ships with the decapping pin and expander already installed, so you're ready to go after a quick setup. Give your cases a light coat of case lube on the body and shoulder before sizing, and check case length afterward since full length sizing can stretch necks a touch. Keep the inside clean and your brass deburred and this die will deliver the kind of consistent, concentric brass that makes the 280 AI such a joy to load.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): 5522
- UPC: 757253991066
- Cartridge: 280 Ackley Improved
- Die Style: Full Length Sizing Die
- Thread: 7/8-14
- Material: Carbon Steel
- Diameter: 0.875 in
- Color: Gray
- Lock Ring: Cross Bolt Die Lock Ring
- Expander: Elevated E-Z Out expander ball
- Quantity: 1 die
What’s Included
- Forster 280 Ackley Improved full length sizing die
- Decapping pin (installed)
- E-Z Out expander ball/spindle assembly (installed)
- Cross Bolt Die Lock Ring
Frequently Asked Questions
What does the Forster 280 Ackley Improved full length sizing die do in one pass?
This die sizes the case neck and body, bumps the shoulder to set proper headspace, deprimes the spent primer, and expands the case neck inside diameter. It's the all-in-one sizing step that gets fired 280 AI brass ready for a fresh bullet. It ships with the expander and decapping pin already installed.
Will this die fit my press?
Yes. It uses the standard 7/8-14 thread, so it threads into virtually any common single stage or turret reloading press, and it works great in a Forster Co-Ax as well. Keep in mind a shell holder is not included, so make sure you have the correct one for the 280 AI case head.
What makes Forster's E-Z Out expander ball different?
Forster positions the expander ball higher up in the neck than most dies. As the case is withdrawn, that elevated ball supports the neck and keeps it aligned with the case axis, which helps produce more concentric, true-running brass. It's one of the main reasons Forster dies are a go-to for accuracy-minded loaders.
Do I need case lube with this sizing die?
Yes. Full length sizing works the whole case body, so you'll want to lightly lube the case body and shoulder before running it through to avoid stuck cases and pressure dents. Go easy on the lube, and check case length afterward since sizing can stretch necks slightly and may call for a trim.




Reviews
There are no reviews yet.