Description
The Forster 6 GT Full Length Die Set with Bushings is built for the handloader who treats every round like it matters. This is a two-die set that pairs a Bushing Full-Length Sizing Die with Forster's Bench Rest Ultra Micrometer Seater Die, and it ships with three bushings so you can get your neck tension where you want it right away. The 6 GT has become a go-to for PRS and NRL competitors who want 6mm accuracy with manageable barrel wear, and a die set like this is where that accuracy really starts.
What the 6 GT Bushing Die Set Brings to the Bench
The full-length sizing die resizes the case body and bumps the shoulder just enough to drop into a minimum-spec SAAMI chamber, which keeps your brass fitting consistently and extends case life. The bushing is what sets this apart from a standard die. Instead of overworking the neck with a fixed sizing diameter, you pick the bushing that gives you the exact neck tension you're after. Less work on the brass means fewer trips through the annealer and more reloads per case. The die also features an etched reference line and Accu-Ring to make repeatable setup easier.
Micrometer Seating in the 6 GT Die Set
The Bench Rest Ultra Micrometer Seater is a non-crimping design that holds the bullet and case in line while the bullet is press-fit seated, which is a big part of how Forster keeps runout low. The micrometer top lets you adjust seating depth in fine increments, so chasing the lands or testing jump is a matter of turning a dial and reading a number rather than guessing with a lock ring. Write down your settings and you can return to a known load any time.
Picking Bushings for Your 6 GT Brass
The set includes .264, .266, and .268 bushings, which covers the common starting points for 6 GT loads depending on your brass and the neck tension you prefer. Measure a loaded round's neck diameter, subtract the tension you want, and match the bushing to that number. Having three on hand lets you experiment at the bench without ordering extras before your first range trip.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 6 GT
- Die Style: Bushing Full Length 2-Die Set
- Seater Type: Bench Rest Ultra Micrometer Seater (non-crimping)
- Sizing Die Features: Etched reference line and Accu-Ring
- Bushings Included: Three (.264, .266, .268)
- Micrometer Adjustment: Fine seating depth adjustment to 0.0005"
- Packaging: Deluxe Die Box
- Manufacturer Part Number: UFB4277
- UPC: 757253990205
- Shipping Weight: 1.45 lbs
What’s Included
- Bushing Full-Length Sizing Die
- Bench Rest Ultra Micrometer Seater Die
- Three bushings (.264, .266, .268)
- Deluxe Die Box
Frequently Asked Questions
Does the 6 GT die set come with bushings or do I need to buy them separately?
This set includes three bushings sized .264, .266, and .268. That covers the common starting points for 6 GT neck tension, so you can start tuning your loads without ordering anything extra. If you later find you need a different size, additional bushings are sold individually.
What makes the Ultra Micrometer Seater different from a standard seater die?
The Bench Rest Ultra Micrometer Seater is a non-crimping design that keeps the bullet and case aligned while the bullet is press-fit seated, which helps keep runout low. The micrometer top lets you adjust seating depth in very fine increments and return to the same setting by reading a number. It makes testing bullet jump and chasing the lands much more repeatable than a standard lock-ring seater.
Do I need a shellholder with this Forster 6 GT die set?
If you're running a Forster Co-Ax press, you don't need a shellholder since those presses don't use one. In any other brand of press, use the shellholder recommended by that press manufacturer for the 6 GT case head.
How do I pick the right bushing for my neck tension?
Measure the neck diameter of a loaded round, then subtract the amount of tension you want, usually a couple thousandths of an inch. Match the bushing to that final number. With .264, .266, and .268 in the set, you have room to experiment at the bench and settle on what shoots best in your rifle.




Reviews
There are no reviews yet.