0
0

Forster 338 Lapua Magnum Bench Rest Seater Die (006341)

UPC: 757253703010

$70.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing tight groups out of a 338 Lapua Magnum, bullet seating is one of those steps that quietly makes or breaks your ammo. Forster's Bench Rest Seater Die was the first design of its kind and it's still one of the best straight-line seaters you can put on your bench. Instead of supporting just the bullet and case neck like a lot of standard dies, it captures the entire outside diameter of the sized case inside a close-fitting chamber, which keeps everything lined up while the bullet is pressed home.

How the 338 Lapua Bench Rest Seater Die Keeps Things Straight

The heart of this die is a sliding chamber machined specifically for the 338 Lapua Magnum. As you run the ram up, the sleeve slides down and surrounds the case, holding the bullet, case, and seating stem in the same concentric space through the whole stroke. A bullet channel just slightly larger than bullet diameter guides the projectile in true, which is exactly what you want when runout is the enemy. The result is consistent, repeatable alignment that competition handloaders have leaned on for decades.

Built for Big-Bore Precision Handloading

Each seating stem is hand polished, and Forster has refined its stems over the years to play nicely with modern hybrid and ballistic tip bullets as well as the long, high-BC projectiles popular in 338 Lapua. The knurled adjustment knob makes dialing in seating depth straightforward, and the die threads into most standard presses. It's machined in the U.S.A. and built to the same bench rest standard Forster is known for across more than 80 cartridges.

Worth noting up front: this is a non-crimping seater, so if you want a crimp you'll run a separate taper or roll crimp die. For a magnum this size, most handloaders skip the crimp and rely on neck tension anyway, so that suits the way the 338 Lapua is typically loaded. It's a clean, no-nonsense tool that does one job extremely well.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 006341
  • UPC: 757253703010
  • Cartridge: 338 Lapua Magnum
  • Die Type: Bench Rest Seater Die (non-micrometer)
  • Seating Style: Non-crimping straight-line
  • Chamber Design: Sliding caliber-specific chamber, captures full case
  • Seating Stem: Hand-polished, adjustable
  • Adjustment: Knurled knob
  • Press Compatibility: Threads into most standard reloading presses
  • Country of Origin: Made in U.S.A.

What’s Included

  • One Forster Bench Rest Seater Die
  • One polished seating stem
  • Die body split lock ring
  • Die storage box
  • Complete instructions

Frequently Asked Questions

Does the 338 Lapua Bench Rest Seater Die crimp the case?

No, this is a non-crimping seater die. It presses the bullet in while holding everything in alignment but does not apply any crimp. If you want a crimp, you'll need to add a separate taper or roll crimp die, though most 338 Lapua handloaders rely on neck tension instead.

Is this the micrometer version of the Forster seater die?

No. This is the standard Bench Rest Seater Die (MPN 006341) with a knurled adjustment knob rather than a micrometer head. Forster does offer a separate Ultra Micrometer version for 338 Lapua if you specifically want micrometer-marked seating depth adjustments.

Do I need a shellholder with this seater die?

If you're running a conventional press, yes, you'll need the correct shellholder for 338 Lapua Magnum, which is sold separately. If you're using a Forster Co-Ax press, no separate shellholder is required since the Co-Ax uses its own jaw system.

Will this die work with long, high-BC 338 bullets?

Yes. Forster has refined its seating stems over the years to fit modern hybrid, ballistic tip, and very low drag bullets, which are common in 338 Lapua loads. The hand-polished stem and concentric bullet channel help seat those longer projectiles straight and consistent.

Additional information

UPC

757253703010

Manufacturer

Manufacturer Part Number

006341

Reviews

There are no reviews yet.

Be the first to review “Forster 338 Lapua Magnum Bench Rest Seater Die (006341)”