0
0

Forster 6.5-284 Full Length Die Set | Bench Rest Sizer & Seater

UPC: 757253071713

$115.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6.5-284 earned its reputation as one of the flat-out most accurate long range cartridges you can load, and Forster's Bench Rest die set is built to help you get the most out of it. This two-die set pairs a Full Length Sizing Die with Forster's famous straight-line Bench Rest Seater Die, both machined to tight tolerances and hand polished before and after heat treating. If you're chasing small groups at distance, this is the kind of tooling that makes a real difference on paper.

What the Forster 6.5-284 Full Length Die Set Does Right

The full length sizer works the neck, shoulder, and body of the case so it drops back into a minimum-spec chamber without fuss. It deprimes and expands the neck in the same stroke. The standout here is Forster's elevated E-Z Out expander ball, which rides up near the die neck for better mechanical advantage on the expansion stroke and helps keep runout down. That carbide expander also takes a lot of the effort out of pulling the case back off the ball.

Straight-Line Seating With the Bench Rest Seater

Forster built the first straight-line seater of its kind, and it's still one of the best going. The sliding die chamber holds the bullet, case, and seating stem in alignment for the whole seating operation, so the bullet goes in dead straight instead of tipping off at an angle. It's a non-crimping design, which keeps things consistent round after round. Reloaders routinely report seating to within a thousandth of their target depth and getting it to repeat every time.

Built for the 6.5-284 Handloader

Every die wears Forster's Cross Bolt lock ring, which clamps the split ring rather than digging a set screw into the die threads, so your settings hold without marring the body. The whole set ships in Forster's oversized Deluxe Die Box. These dies are at home on bolt-action and single-shot precision rigs where concentric, repeatable ammo is the whole point.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004281
  • UPC: 757253071713
  • Cartridge: 6.5-284 Winchester / Norma
  • Die Set Type: Full Length Sizer & Bench Rest Seater
  • Number of Dies: 2
  • Material: Case-Hardened Steel
  • Seater Style: Non-Crimping Straight-Line Bench Rest
  • Expander: Elevated E-Z Out Expander Ball
  • Lock Ring: Forster Cross Bolt
  • Packaging: Deluxe Die Box

What’s Included

  • Full Length Sizing Die (with decapping and expander unit)
  • Bench Rest Bullet Seater Die
  • Forster Cross Bolt lock rings
  • Deluxe Die Box storage case

Frequently Asked Questions

Does the Forster 6.5-284 die set come with a shell holder?

No, a shell holder is not included with this set. You'll need to pick up the correct shell holder for the 6.5-284 case head, which shares the .473 base used by many common cartridges. Most reloaders already have one on the bench, but grab it separately if you don't.

Is this a micrometer seater die?

No, this set includes Forster's standard Bench Rest Seater Die, not the Ultra Micrometer version. It still seats bullets dead straight and is simple to dial in, with reloaders routinely holding depth to within a thousandth once set. If you want a micrometer top for quick repeatable adjustments across different loads, Forster offers that as a separate upgrade.

Will this set work for both 6.5-284 Winchester and 6.5-284 Norma?

Yes. The 6.5-284 Winchester and 6.5-284 Norma are the same cartridge, just with different naming history, so these dies cover both. Forster uses the 004281 part number for the full length sizer and Bench Rest seater combo in this chambering.

What kind of rifles is this die set best suited for?

Forster Bench Rest dies shine in bolt-action and single-shot precision rifles where concentric, repeatable ammo matters most. The full length sizer brings brass back to minimum spec for reliable chambering, which makes it a solid all-around choice even if you also neck size between loadings.

Additional information

UPC

757253071713

Manufacturer

Manufacturer Part Number

004281

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5-284 Full Length Die Set | Bench Rest Sizer & Seater”