0
0

Forster #36 Drill Jig Bushing for Universal Sight Mounting Fixture

UPC: 757253006883

$11.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster #36 Drill Bushing is a hardened steel guide bushing made to drop into the sliding over-arm of the Forster Universal Sight Mounting Fixture. The #36 size lines up with the pilot hole used ahead of 6-48 threads, which is the go-to thread for mounting scope bases, receiver sights, and shotgun beads on rifles and shotguns. It keeps your drill bit in true alignment with the exact center of the barrel, so the hole lands right where you want it every single time.

What the #36 Bushing Does in the Jig

The idea behind the Forster fixture is simple: the bit rides through a precision bushing instead of freehand, which takes the guesswork out of the whole job. The over-arm has holes spaced at .500 inch and .860 inch between centers, and the interchangeable bushings drop right in. Once you've drilled with the #36, you swap in the matching tap bushing so the tap runs straight and doesn't cock over. That cocking is one of the biggest reasons taps snap off in a hole, and this setup goes a long way toward preventing it.

Built to Last in the Forster System

Forster has been machining these bushings from hardened steel for decades, and they hold their tolerance job after job. Gunsmiths who've run the Universal Sight Mounting Fixture for thirty-plus years still reach for the same bushings, which tells you plenty about how well they wear. This is a replacement or add-on piece, so it's meant for anyone who already owns the fixture or is building out a fuller set of drill and tap sizes.

If you're drilling and tapping single-barrel long guns and want clean, repeatable holes without the risk of ruining a good barrel, the #36 bushing is a small part that earns its keep. Pair it with the correct tap bushing and you've got a proven setup for 6-48 work.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: UF1000-024
  • UPC: 757253006883
  • Bushing Size: #36
  • Type: Drill Jig Bushing
  • Material: Hardened Steel
  • Thread Application: 6-48
  • Compatible With: Forster Universal Sight Mounting Fixture
  • Center Spacing: .500 in and .860 in
  • Category: Gunsmithing Tools & Supplies

What’s Included

  • One Forster #36 Drill Jig Bushing (UF1000-024)

Frequently Asked Questions

What does the Forster #36 drill bushing fit?

It's made to drop into the sliding over-arm of the Forster Universal Sight Mounting Fixture. The bushing seats in the interchangeable holes spaced at .500 inch and .860 inch between centers. It won't work as a standalone tool; you need the fixture to use it.

What thread size is the #36 bushing used for?

The #36 size lines up with the pilot hole you drill ahead of cutting 6-48 threads, which is the standard thread for most scope bases and receiver sights. After drilling with the #36, you switch to the matching tap bushing to run the tap. Together they keep the whole operation aligned with the center of the barrel.

Why use a drill bushing instead of drilling freehand?

The bushing keeps your bit in true alignment so the hole lands exactly on center, which is tough to do by hand on a curved barrel. It also helps when you move to tapping, since a correctly sized bushing stops the tap from cocking over. That cocking is a major cause of broken taps and sloppy, off-center holes.

Is this a replacement bushing or does it come with a full set?

This listing is for the single #36 bushing on its own. It's meant as a replacement or an add-on for people who already own the Universal Sight Mounting Fixture. Forster also offers full drill and tap bushing sets if you're building out more thread sizes.

Additional information

UPC

757253006883

Manufacturer

Manufacturer Part Number

UF1000-024

Reviews

There are no reviews yet.

Be the first to review “Forster #36 Drill Jig Bushing for Universal Sight Mounting Fixture”