0
0

Forster Stockmaker’s Hand Screws – Springfield/Krag 1/4″-25 Thread

UPC: 757253006142

$18.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Fitting a stock to an action is one of those jobs where patience pays off, and having the right tool makes all the difference. These Forster Stockmaker's Hand Screws are threaded 1/4"-25 to match Springfield 1903, 1903A3, and Krag actions, giving you a clean way to pull the barreled action down snug into the stock while you check your inletting. They come as a set of two with roughly 3-inch handles so you can hand-tighten, break things loose, and repeat the process as many times as it takes to dial in a tight fit.

The whole point of a dedicated tool like this is to keep your original guard screws out of harm's way. Trial fitting a stock over and over will beat up the real screws and can scar the wood if you're not careful, so stockmakers reach for these instead. The screws are precision machined and hardened, which means they hold up to repeated trial fittings without wearing out or losing their thread integrity.

Where the Springfield/Krag Hand Screws Earn Their Keep

Beyond basic fitting, these are a go-to during glass bedding. The extended handles let you clamp the action firmly in place while epoxy sets, keeping everything aligned so your pillars and action holes stay indexed. A lot of folks working on sporterized 1903s and 1917-style builds keep a set on the bench, and the tapered design helps center the action as you snug it down.

A Note on Fitment for the 1/4"-25 Set

The 1/4"-25 thread is a bit of an oddball that matches the older Springfield and Krag pattern rather than modern screw standards, so this set is thread-specific for those actions. Because military rifles and their sporter conversions can vary, some builders trim a screw slightly to match a shorter takedown screw, but the threads themselves are correct for the platform. If you're building or restoring on a Springfield or Krag action, this is the set that speaks the right language.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: SMSPRI
  • UPC: 757253006142
  • Fits: Springfield 1903, 1903A3, Krag
  • Thread Size: 1/4"-25
  • Handle Length: Approx. 3" (7.6 cm)
  • Quantity: Set of 2
  • Material/Construction: Precision machined, hardened steel
  • Category: Gunsmithing Tools & Stockmaking Supplies

What’s Included

  • 2 Forster Stockmaker's Hand Screws (Springfield/Krag, 1/4"-25 thread)

Frequently Asked Questions

What actions do these Springfield/Krag hand screws fit?

These are threaded 1/4"-25 to match Springfield 1903, 1903A3, and Krag actions. That thread is specific to the older Springfield and Krag pattern, so make sure your action uses the 1/4"-25 guard screw thread before ordering. Forster offers separate sets for Mauser, Enfield, Winchester 70, and other platforms if yours is different.

Why use stockmaker's hand screws instead of the rifle's own guard screws?

Trial fitting a stock takes many rounds of installing and removing the action, which wears out and can damage your original guard screws over time. These hardened tools take that abuse instead, so your real screws stay pristine. The longer handles also make hand tightening and loosening quicker than fumbling with a screwdriver every pass.

Can I use these hand screws for glass bedding?

Yes, they're commonly used to clamp the barreled action in place while bedding epoxy cures. The tapered design helps index the action so your pillars and action holes stay aligned. Many builders wax or tape the shaft first to keep epoxy from locking things together and to make teardown clean.

Do I need to modify the screws for a sporterized rifle?

Sometimes. Military rifles and their sporter conversions vary in takedown screw length, so a few builders trim a hand screw slightly to match a shorter original screw. The threads themselves are correct for the Springfield and Krag platform, so any trimming is just about matching your specific build.

Additional information

UPC

757253006142

Manufacturer

Manufacturer Part Number

SMSPRI

Reviews

There are no reviews yet.

Be the first to review “Forster Stockmaker’s Hand Screws – Springfield/Krag 1/4″-25 Thread”