Description
When you're fitting a stock to an action, you end up pulling the barreled action in and out more times than you can count. Doing that with your factory guard screws is asking for chewed-up threads and a rough day at the bench. These Forster Stockmakers Hand Screws give you a dedicated set of tools for that exact job, with T-handles that turn by hand and hardened steel that holds up to fitting after fitting.
This set is threaded 1/4 x 28 tpi and drops right into Remington 700, 721, 722, and 40X actions, along with the Savage 110, Weatherby Mark V, and Dakota. The T-handle design lets you snug the action down and back it out without reaching for a screwdriver every pass, which matters when you're checking clearances a dozen times over.
Where the Stockmakers Hand Screws Earn Their Keep
Inletting a new stock and glass bedding an action are the two jobs these were made for. Folks who do this kind of work regularly lean on them for keeping the barreled action aligned in the stock while everything sets up, so you get that tight, even inlet instead of a sloppy fit. They also come in handy for pillar bedding, holding pillars in place while you confirm the length is right before anything gets locked in.
Why Not Just Use Your Guard Screws
Your original screws were made to hold a rifle together, not to survive repeated trial fittings. Cycle them through a bedding job and you risk booger-ing up the threads or worse, marring the stock. Forster hardened these specifically so they can take that abuse and keep going. It's a small investment that saves you from the kind of mistake that ruins an afternoon and a good piece of walnut.
You get two screws in the set, and they've built a solid reputation among stockmakers and home gunsmiths who tackle their own bedding work. If you're setting up a bench for stock fitting, this is one of those tools you'll wonder how you did without.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: SMREMI
- UPC: 757253006081
- Thread Size: 1/4 x 28 tpi
- Handle Type: T-Handle
- Material: Precision-made hardened steel
- Quantity: Set of 2
- Rifle Fitment: Remington 700, 721, 722, 40X; Savage 110; Weatherby Mark V; Dakota
- Intended Use: Stock inletting and action bedding
What’s Included
- 2 Forster Stockmakers Hand Screws (T-handle)
Frequently Asked Questions
What rifles do the Forster Stockmakers Hand Screws fit?
This set is threaded 1/4 x 28 tpi and fits the Remington 700, 721, 722, and 40X actions. It also works with the Savage 110, Weatherby Mark V, and Dakota actions. Forster makes separate versions for other actions like Mauser 98, Winchester 70, and Ruger 77, so double-check you've got the right set for your rifle.
What are these hand screws actually used for?
They're made for inletting a new stock and bedding an action. The T-handles let you seat the barreled action into the stock and back it out by hand, over and over, while you dial in the fit. That saves wear on your factory guard screws and keeps everything aligned during the process.
Why not just use my rifle's original guard screws for bedding?
Factory screws are built to hold a rifle together, not to endure dozens of trial fittings. Running them through a bedding job risks damaging the threads or marring the stock. These are hardened specifically to take that repeated use, and the T-handle makes the whole job faster and cleaner.
Are the Forster Stockmakers Hand Screws well-built?
Yes, they're precision made and hardened to hold up through repeated trial fittings, and they've earned a good name among stockmakers and home gunsmiths. On some heavily modified or sporterized military rifles you may need to shorten a screw to match a short takedown screw, but that's a quick adjustment for an off-list build.





Reviews
There are no reviews yet.