Description
Headspace is one of those things you don't think about until it goes wrong, and by then it can be a real problem. This Forster No-Go gauge for the 6.5x55mm Swedish Mauser gives you a straightforward way to confirm your chamber isn't running long. It's built from hardened steel and precision ground to SAAMI dimensions, so you're measuring against a known reference every single time you drop it in the chamber.
The No-Go is the middle gauge in Forster's three-length lineup, sitting between the Go and Field gauges. Here's the short version of how it works: with the bolt stripped of the firing pin and ejector and the chamber clean, your action should close fully on a Go gauge but should NOT close on the No-Go. If the bolt won't lock up on this gauge, your headspace is within a healthy range. If it does close, that's your cue to check further with a Field gauge before firing.
Where This 6.5×55 Swede No-Go Gauge Earns Its Keep
This is the tool to reach for when you're chambering a new barrel, doing routine maintenance, or sizing up a used Swedish Mauser before you buy it. A lot of these old military rifles have been around for over a century and passed through plenty of hands, so verifying headspace before that first shot is just smart. Gunsmiths typically set a chamber to fall between the Go and No-Go dimensions, and this gauge is what confirms the upper end of that window.
Steel Construction Built to Forster Standards
Forster has been making these gauges to exacting manufacturing tolerances for a long time, and it shows in the fit and finish. Machined from steel with a length of 1.788 inches, this No-Go gauge drops in clean and gives you a repeatable reading. It's a single gauge, so if you're setting up a full check you'll want to pair it with a Go gauge to bracket your measurement properly.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG6555N
- UPC: 757253004674
- Caliber: 6.5x55mm Swedish Mauser
- Style: No-Go Gauge
- Gauge Type: Rimless, SAAMI Dimensioned
- Material: Hardened Steel, Precision Ground
- Color: Steel
- Length: 1.788 in
- Quantity: 1
What’s Included
- One Forster 6.5x55mm Swede No-Go headspace gauge (HG6555N)
Frequently Asked Questions
What does it mean if my bolt closes on the 6.5×55 Swede No-Go gauge?
If the bolt closes fully on the No-Go gauge, your rifle may have excessive headspace. It doesn't automatically mean the rifle is unsafe, but it's a sign to check further with a Field gauge before firing. Most gunsmiths chamber a rifle to fall between the Go and No-Go dimensions, so closing on this gauge tells you you've reached the upper limit.
Do I need a Go gauge too, or is the No-Go enough on its own?
For a complete headspace check you'll want both. The Go gauge confirms your chamber isn't too tight and the bolt closes properly, while the No-Go confirms it isn't too long. This listing is for the No-Go gauge only, so pick up a matching Go gauge if you don't already have one.
Will this gauge work on any 6.5x55mm Swedish Mauser?
Yes. Forster's 6.5×55 Swede gauges are cut to SAAMI dimensions and work across 6.5x55mm Swedish Mauser chambers. That covers the classic military Swedish Mausers as well as modern sporting rifles built for the cartridge.
How do I use the No-Go gauge correctly?
Make sure the rifle is unloaded, then strip the bolt of the firing pin and ejector so nothing skews your reading, and clean the chamber. Gently lower the bolt onto the gauge without forcing it. The bolt should not fully close and lock up on the No-Go, which confirms your headspace is within a safe range.





Reviews
There are no reviews yet.