Description
The Forster Gunsmith Screwdriver #2 is one of those tools you reach for without thinking once it's on your bench. It's ground specifically for the smaller slotted screws you run into on scope work, most notably Lyman, Leupold, and Redfield scope screws, along with the backstrap screws on a lot of six-guns. The blade measures 3/16" wide with a 4" shank, a tip thickness of about 0.032", and a face width around 0.046", so it drops into those slots the way a proper gunsmith driver should instead of camming out and chewing up the head.
Why the #2 Blade Grind Matters
The whole point of a Forster driver is the parallel-ground, hollow ground tip. Instead of the tapered wedge you get on a hardware-store screwdriver, the sides run parallel so the blade fills the bottom of the slot where the screw is strongest. That means torque goes into turning the screw rather than trying to lift the blade up and out. On finished blued screws and delicate scope hardware, that's the difference between a clean job and a buggered slot.
Built for the Long Haul
Forster has been making tools in the USA since 1935, and these drivers are cut from hardened steel with a comfortable red handle that gives you plenty of grip for real leverage. The single-blade design keeps things simple, no bits to lose or spin loose mid-job. While it earns its keep at the gun bench, plenty of folks keep one around for hobby electronics, watch cases, and other fine slotted work where a properly fitted tip saves headaches.
If you're building out a dedicated set of fixed-blade gunsmith drivers rather than fussing with an interchangeable-bit kit, the #2 is a cornerstone size for anyone who mounts optics or works on revolvers.
Key Specifications
- Manufacturer: Forster Products
- Model: Gunsmith Screwdriver #2
- Manufacturer Part Number: 001061
- UPC: 757253000041
- Style: Parallel Tip / Hollow Ground
- Blade Width: 3/16"
- Shank Length: 4"
- Tip Thickness: 0.032"
- Tip Face Width: 0.046"
- Blade Material: Hardened Steel
- Handle: Red Plastic
- Common Use: Lyman, Leupold, Redfield scope screws; six-gun backstrap
- Country of Origin: Made in USA
What’s Included
- Forster Gunsmith Screwdriver #2 (single driver)
Frequently Asked Questions
What screws is the Forster #2 screwdriver made for?
The #2 is ground for smaller slotted screws like Lyman, Leupold, and Redfield scope screws, plus the backstrap screws on many revolvers. Its 3/16" blade width and 0.032" tip thickness are sized to fit those slots snugly. It's a go-to for optics mounting work.
What does hollow ground and parallel tip mean on this driver?
A hollow ground, parallel-tip blade has sides that run straight down instead of tapering to a wedge. That lets the tip seat flat in the bottom of the screw slot where the screw is strongest, transferring more torque and reducing the chance of slipping out. It's the design that separates a real gunsmith driver from a common hardware store screwdriver.
Does the Forster Gunsmith Screwdriver #2 come as a single driver or a set?
This listing is for the #2 driver on its own. Forster also offers an eight-piece set that bundles several sizes together in a storage pouch, but if you just need the #2 size for scope work, buying it individually keeps things simple.
Can I use the #2 for non-firearm tasks?
Yes. While it's built for gunsmithing, the hardened steel blade and precise tip make it handy for fine slotted screws on electronics, watches, and other detail work. A properly fitting tip protects screw heads no matter what you're turning.





Reviews
There are no reviews yet.