Description
If you've been meaning to speed up your case prep on 6.5 PRC brass, this is one of the simplest ways to do it. The Lee Precision 6.5 PRC Custom Quick Trim Die holds your fired case securely so the Quick Trim cutter shaves the mouth square every time. It's a cartridge-specific die body, so it's cut to the exact dimensions of the 6.5 PRC and does one job well.
This die threads in at the standard 7/8"-14 size, which means it drops right into any press that takes common reloading dies. An O-ring inside the body grips the case and keeps it from spinning while the cutter does the work, so you get a clean, repeatable trim without wrestling the brass.
How the 6.5 PRC Quick Trim Die Fits Your Setup
Keep in mind this is the die body only. It's built to run with the Lee Deluxe Quick Trim Case Trimmer or the Value Trim cutter, both sold separately. Once you've got one of those cutters, you just install the die in your press, drop in a case, and go. The cutter trims to length while chamfering the inside and outside of the case mouth in the same motion, so there's no second trip to a separate deburring tool for most folks. The adjustable stop on the Lee cutter dials in trim length in .001-inch increments, letting you set a uniform length and even go a touch shorter to stretch out the time between trimming sessions.
What to Know Before You Run It
A shell holder is required and is not included with the die, so grab the right one for the 6.5 PRC if you don't already have it on the bench. Since the die sizes and holds at the mouth, it's best suited for brass fired in your own rifle and loaded on a bolt gun, not autoloaders or lever actions. Lee has been building reloading gear in Wisconsin since 1958, and this little die is a good example of their no-nonsense approach to getting the job done without a lot of fuss or a pile of extra accessories.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91348
- UPC: 734307913489
- Cartridge: 6.5 PRC
- Type: Quick Trim Die (die body only)
- Thread Size: 7/8"-14 standard
- Number of Dies: 1
- Shell Holder Required: Yes
- Shell Holder Included: No
- Works With: Lee Deluxe Quick Trim or Value Trim cutter (sold separately)
- Country of Origin: USA
What’s Included
- Lee 6.5 PRC Custom Quick Trim Die body
- Plastic die storage box
Frequently Asked Questions
Does the 6.5 PRC Quick Trim Die come with the cutter I need to trim?
No, this is the cartridge-specific die body only. You'll need either the Lee Deluxe Quick Trim Case Trimmer or the Value Trim cutter to actually trim the brass, and both are sold separately. Once you have one of those, this die handles the 6.5 PRC.
Will this die fit my reloading press?
It should. The die is threaded 7/8"-14, which is the standard size used by the vast majority of reloading presses. If your press accepts common reloading dies, this one will thread right in.
Does the Quick Trim system chamfer and deburr too, or just trim?
When paired with a Lee Quick Trim cutter, it trims the case to length while chamfering the inside and outside of the case mouth in the same step. That cuts out a lot of the separate deburring work on most brass. The cutter's click-adjustable stop sets your trim length in .001-inch increments.
Do I need a shell holder for the 6.5 PRC Quick Trim Die?
Yes, a shell holder is required and it is not included with the die. Make sure you have the correct holder sized for the 6.5 PRC before you set up to trim.



Reviews
There are no reviews yet.