Description
The 5.7x28mm FN has never been the easiest round to feed a hobby, so having a dedicated die from Lee Precision makes the whole process a lot less of a headache. This single full-length sizing die handles the heavy lifting of case prep: it squeezes the brass back down along its entire length and punches out the old primer in the same pull of the handle. It uses the standard 7/8-14 thread, so it drops right into any common single-stage or turret press you've already got on the bench.
Why the 5.7×28 FN Sizing Die Earns Its Spot
Unlike a neck-sizing die that only touches the mouth, a full-length die works the body and neck together, bringing fired cases back to factory dimensions. That matters most when you're running a semi-auto, since tighter, consistent sizing means rounds chamber smoothly round after round. If you've ever picked up range brass or mixed sources you aren't sure were fired in your own gun, this is the die that makes those cases safe and reliable to load again.
Getting the Most From This Lee 5.7×28 Die
The 5.7×28 case is thin and soft, which is worth knowing before you start cranking. Lee recommends running their resizing lubricant to keep cases moving freely and to protect the brass as it works through the die. Worth mentioning: a lot of current 5.7 brass is fully annealed with very soft rims, and Lee makes a dedicated FN shell holder (#92183) for exactly this reason since a standard universal shell holder can deform those rims during sizing. If you reload much of this caliber, pairing the two is the way to go.
This is the sizing die sold on its own, which is handy if you already own a seating die or a complete set and just need to replace or add this piece. Built from steel and made in the USA, it's the same quality you'd expect across the Lee die lineup.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91129
- UPC: 734307911294
- Cartridge: 5.7x28mm FN
- Die Style: Full Length Sizing Die
- Die Type: Single Die
- Thread: 7/8-14
- Material: Steel
- Gun Type: Rifle / Handgun
- Country of Origin: Made in USA
- Resizing Lubricant: Required
What’s Included
- 5.7×28 FN Full Length Sizing Die
Frequently Asked Questions
Does the 5.7×28 FN full length sizing die also remove the spent primer?
Yes. This die resizes the full length of the case and deprimes it in the same stroke. You get your brass back to factory dimensions and the old primer knocked out in one pass, which keeps your prep steps simple.
Will this Lee 5.7×28 die fit my press?
It uses the standard 7/8-14 thread, so it threads into virtually any common single-stage or turret reloading press. There's no special press required to run it.
Do I need lubricant with this sizing die?
Yes, a full-length sizing die like this one requires case lube to work properly and protect your brass. Lee recommends their resizing lubricant for the 5.7×28, which is especially important since this brass tends to be soft.
Does this come as a complete die set?
No, this is the full length sizing die sold on its own, not a set. It's a great pick if you already own a seating die or want to replace just the sizer, but if you need everything to load from scratch you'll want a complete 5.7×28 die set plus a seating die.





Reviews
There are no reviews yet.