Description
The Lee 575-472-M is the mold you reach for when you want to feed your .58 caliber rifled musket or muzzleloader without buying bullets one box at a time. It casts a .575 diameter, 472 grain Minie bullet with a hollow base, the classic conical design that loads straight and shoots true down a rifled bore. This is an improved Minie design, which Lee builds to cast and load a little easier than the older style, and the bullets usually drop ready to shoot without any sizing.
What Sets the Lee 575-472-M Apart
Like every Lee mold, the blocks are machined from aluminum rather than iron or steel. That matters more than it sounds. Aluminum heats up fast and cools quickly, so you can start dropping good bullets after just a few casts instead of babysitting a cold block for twenty minutes. It is also roughly a third the weight of a steel mold, which your hands will thank you for during a long casting session. The cavity is CNC machined for tight roundness and consistent weight from one bullet to the next.
Casting With the 575-472-M Minie Mold
The hollow base is formed by an automatic core pin that self-centers as the mold closes, so every bullet gets an even, properly centered cavity. Flip the mold upside down to drop the finished bullet, close it back up, and you are ready for the next pour. Once you have a rhythm going, cranking out around 200 bullets an hour is realistic. Pure lead is the way to go with Minie bullets, since the soft lead lets the skirt expand and grip the rifling the way it should.
Built to Outlast the Rifle
This is a single cavity setup, and it arrives ready to work. Lee includes the hardwood handles, the hard anodized sprue plate, and the instructions, so you are not hunting down extra parts before your first melt. Treat it right and it will keep feeding your .58 for a very long time.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90476
- UPC: 734307904760
- Mold Designation: 575-472-M
- Caliber: 58 Caliber
- Bullet Diameter: 0.575 in
- Bullet Weight: 472 Grains
- Bullet Style: Improved Minie, Hollow Base
- Cavities: 1 (Single Cavity)
- Core Pin: Automatic, Self-Centering
- Block Material: CNC Machined Aluminum
- Sprue Plate: Hard Anodized
- Country of Manufacture: United States
What’s Included
- Two aluminum mold block halves (575-472-M single cavity)
- Hardwood handles
- Hard anodized sprue plate
- Instructions
Frequently Asked Questions
Does the Lee 575-472-M come with handles?
Yes. The mold ships with the hardwood handles and the hard anodized sprue plate already included, along with instructions. You will not need to buy separate handles to start casting.
What kind of bullet does this mold cast?
It casts a .575 diameter, 472 grain improved Minie bullet with a hollow base, sized for .58 caliber rifled muskets and muzzleloaders. The automatic core pin forms and centers the hollow base on every pour. These are usually ready to load without sizing.
Should I use pure lead with this Minie mold?
Pure soft lead is the right choice for Minie bullets. The soft lead lets the hollow base skirt expand and grip the rifling when fired, which is how the Minie design seals and shoots accurately. Harder alloys will not obturate the same way.
How many bullets can I cast per hour with the 575-472-M?
Once the aluminum blocks are up to temperature and you have a steady rhythm, casting around 200 bullets an hour is realistic. The aluminum blocks reach casting temperature quickly, so you spend less time waiting and more time dropping good bullets.





Reviews
There are no reviews yet.