0
0

Lee Precision 365-95-1R 9mm (.365″) 95gr Round Nose Bullet Mold

UPC: 734307904661

$33.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 365-95-1R is a two cavity bullet mold built to cast a .365 diameter, 95 grain round nose bullet. That .365 bore size makes it the right fit for 9mm Makarov, a cartridge that runs a fatter projectile than the .355 to .356 bullets used in 9mm Luger. If you shoot the Mak and want to keep feeding it without hunting down factory ammo, casting your own is the way to stretch a pot of lead a long way.

The finished bullet runs an overall length right around .420 inches, with the first lube groove sitting about .212 inches back from the nose. That round nose profile feeds smoothly and is a proven shape for plinking and range work.

What Makes the 365-95-1R Mold Tick

Lee machines the mold blocks from aluminum, which heats up fast and cools quickly between pours, so you spend less time waiting and more time dropping bullets. The cavities are CNC machined for roundness and size control, and most bullets drop ready to load without a separate sizing step. Because it is a double cavity design, you are casting two bullets every cycle, which adds up quick over a long session at the pot. The aluminum also keeps the whole setup light in the hand, so your wrist is not worn out after a few hundred rounds.

Getting the Best Results From Your 365-95-1R

Like any aluminum mold, the first few casts tend to come out a little wrinkled until the blocks get up to temperature. Once it is warmed in, bullets start dropping clean and consistent. Lee recommends lubing the mold with beeswax or an anti-seize lubricant per the included instructions, and steering clear of spray-type mold release, which can build up in the cavity and shrink your bullet diameter. Handles are included in the box, so you have what you need to start casting. A good lead pot, a ladle or bottom-pour furnace, and quality alloy round out the setup.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90466
  • Model: 365-95-1R
  • UPC: 734307904661
  • Caliber: 9mm (9mm Makarov)
  • Bullet Diameter: 0.365 in
  • Bullet Weight: 95 grains
  • Bullet Style: Round Nose (RN)
  • Cavities: 2 (Double Cavity)
  • Block Material: Aluminum
  • Bullet Overall Length: 0.420 in
  • Nose to First Lube Groove: 0.212 in

What’s Included

  • Lee 365-95-1R double cavity mold block
  • Mold handles
  • Sprue plate
  • Instructions

Frequently Asked Questions

What cartridge is the 365-95-1R mold made for?

This mold casts a .365 diameter, 95 grain round nose bullet, which is sized for 9mm Makarov. The .365 bore is wider than the .355 to .356 bullets used in standard 9mm Luger, so this is specifically a Makarov mold rather than a 9mm Luger one. Match your bullet diameter to your firearm before loading.

Does the Lee 365-95-1R mold come with handles?

Yes, the handles and sprue plate are included in the box with this double cavity mold. You will still need a lead melting pot, an alloy source, and basic casting gear to get going. Many casters pair it with a dedicated sizing and lube setup depending on how the bullets drop from their alloy.

Do I need to size the bullets after casting?

Lee machines these cavities for tight roundness and size control, and most bullets can be loaded as cast without a separate sizing step. That said, your final diameter can vary a little with the alloy you use, so it is worth measuring a few drops. If they run oversized or you want a specific fit, a sizing die will dial them in.

Why does the mold cast wrinkled bullets at first?

Aluminum molds need to come up to temperature before they drop clean bullets, so the first handful of casts often show wrinkles or incomplete fill. Once the blocks heat up, the bullets start dropping sharp and consistent. Keeping the mold properly lubed per the instructions also helps it run smoothly.

Additional information

UPC

734307904661

Manufacturer

Manufacturer Part Number

90466

Bullet Weight (Grains)

95

Caliber/Gauge

9mm

Shipping Weight

0.6375

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 365-95-1R 9mm (.365″) 95gr Round Nose Bullet Mold”