0
0

MDT XRS Forend Weight 1lb Steel Nitrided Black – XRS Chassis

UPC: 682157402205

$89.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The MDT XRS Forend Weight is a straightforward way to tune how your XRS Chassis carries and shoots. It's a single-piece steel bar that adds a full pound to the front section of the chassis, moving your balance point forward for a steadier hold and a noticeable drop in felt recoil. If you've ever felt like your rifle was tail-heavy or wanted a smoother settle back on target between shots, this is the kind of upgrade that makes a real difference at the bench or in a match.

What the XRS Forend Weight Does for Your Setup

Adding weight up front changes the whole feel of the gun. That extra pound out toward the muzzle end helps the rifle track flatter, hold on a bag more consistently, and soak up recoil so you can spot your own impacts. Precision folks running PRS-style stages or bench work tend to chase this kind of balance tuning, and having a dedicated weight built for the forend beats stuffing in makeshift options.

Fit and Build on the XRS Forend Weight

The weight measures roughly 10 by 1.125 by 0.5 inches and is sized to fill the interior of the XRS forend. It's made from steel with a nitrided finish for corrosion resistance, so it holds up well tucked inside the chassis. There's an underside clearance slot cut for M-LOK nut clearance, and it leaves room for barrel contours up to 1.25 inches, so heavy sporter and varmint profiles have room to breathe.

Installing the XRS Forend Weight

One of the best parts is how simple it goes in. You don't need to pull the barreled action or remove the chassis forend. The weight slides in from the end of the chassis, tucks under the barrel, and locks down with the six included flat-head cap screws. A few minutes with a hex key and you're back on the range. Keep in mind this is built for the MDT XRS Chassis specifically, and XRS chassis made before 2021 may need MDT's retro-fit kit to accept it.

Key Specifications

  • Manufacturer: MDT
  • Manufacturer Part Number: 105252-BLK
  • UPC: 682157402205
  • Color: Black
  • Material: Single-piece steel
  • Finish: Nitrided for corrosion resistance
  • Added Weight: 1 lb
  • Approximate Dimensions: 10" x 1.125" x 0.5"
  • Barrel Contour Clearance: Up to 1.25"
  • Compatibility: MDT XRS Chassis System only
  • Mounting Hardware: 6x #10-24 x 5/8" Flat-Head Cap Screws
  • Country of Origin: United States

What’s Included

  • MDT XRS Forend Weight (1 lb steel bar)
  • 6x #10-24 x 5/8" Flat-Head Cap Screws

Frequently Asked Questions

Will the XRS Forend Weight fit my chassis?

This weight is designed for the MDT XRS Chassis System only. As of 2021, MDT updated the XRS forend to accept it directly, so newer chassis are ready to go. If your XRS chassis was purchased before 2021, you may need MDT's retro-fit kit for it to fit.

How much weight does the MDT XRS Forend Weight add and where does it go?

It adds a full pound to the front section, or forend, of the chassis. Placing weight up front shifts the rifle's balance point forward, which steadies your hold and helps reduce felt recoil. It's a simple way to fine-tune how the gun tracks and settles between shots.

Is the XRS Forend Weight hard to install?

Not at all. You don't have to remove the barreled action or the chassis forend to put it in. The weight slides in from the end of the chassis, tucks under the barrel, and is held in place with the six included flat-head cap screws using a hex key.

Will it clear my heavy barrel profile?

The forend weight has clearance for barrel contours up to 1.25 inches, so most heavy and varmint profiles fit fine. It also has an underside slot cut for M-LOK nut clearance. If you're running an unusually large contour, measure first to be safe.

Additional information

UPC

682157402205

Manufacturer

Manufacturer Part Number

105252-BLK

Reviews

There are no reviews yet.

Be the first to review “MDT XRS Forend Weight 1lb Steel Nitrided Black – XRS Chassis”