Description
The Berger 22 Caliber 80.5gr Fullbore Target is one of those bullets that competitive across-the-course shooters keep coming back to. Built on a .224 diameter boat tail design, it was engineered specifically for AR platform target rifles where reliable magazine feeding and consistency matter just as much as raw accuracy. It carries a G1 ballistic coefficient of 0.441 and a G7 of 0.226, which keeps it bucking the wind nicely well past mid-range and out to 600 yards or more.
What sets this one apart is the tangent ogive profile. Secant designs can be a little finicky to tune, but the tangent shape on the Fullbore makes it much more forgiving when you're working up a load. It loads easy, tunes easy, and shoots easy, which is why it has a reputation for being one of the more user-friendly match bullets in Berger's .22 lineup.
What Makes the Berger Fullbore Target Shoot So Well
Every Fullbore bullet is wrapped in a J4 Precision jacket, and that's where a lot of the accuracy comes from. These jackets hold a Total Indicated Runout of +/- .0001 and are made to extremely tight tolerances, so concentricity stays consistent from one bullet to the next. With a sectional density of 0.229 and an overall length of 1.091 inches, it also conforms to SAAMI overall length specs, making it a solid pick when magazine feeding is a requirement.
Twist Rate and Setup for the 80.5gr Fullbore
To stabilize this heavier .22 projectile, you'll want a barrel with a 1:8 twist or faster. Run it slower than that and you won't get the full accuracy potential out of it. It's a popular choice for service rifle and high power competition, and it pairs well with the kind of long-strings-of-fire shooting that across-the-course matches demand. Keep in mind this is a component bullet for reloading, not loaded ammunition.
Key Specifications
- Manufacturer: Berger Bullets
- Manufacturer Part Number (MPN): 22727
- UPC: 679459227278
- Caliber: .22 Caliber
- Bullet Diameter: 0.224 in
- Bullet Weight: 80.5 Grains
- Bullet Style: Fullbore Target Boat Tail
- Ogive: Tangent
- Jacket: J4 Precision Target Jacket
- G1 Ballistic Coefficient: 0.441
- G7 Ballistic Coefficient: 0.226
- Sectional Density: 0.229
- Overall Length: 1.091 in
- Minimum Twist Rate: 1:8 or faster
- Quantity: 1000 per box
What’s Included
- 1000 Berger 22 Caliber (.224) 80.5gr Fullbore Target boat tail bullets
Frequently Asked Questions
What twist rate do I need to stabilize the Berger 80.5gr Fullbore Target?
Berger recommends a minimum twist rate of 1:8 or faster to properly stabilize this 80.5 grain bullet. Running a slower twist will leave accuracy on the table, especially at longer distances. If your barrel is 1:8 or tighter, you're in good shape.
Is the Berger Fullbore Target loaded ammunition or a component bullet?
This is a component bullet intended for handloading, not loaded ammunition. You'll need your own brass, powder, and primers to assemble a complete cartridge. It's a popular choice among reloaders building match loads for across-the-course competition.
Why choose the tangent ogive Fullbore over a secant design?
The tangent ogive on the Fullbore is more forgiving during load development and less sensitive to seating depth than secant-ogive bullets. That makes it easier to load, tune, and shoot consistently. It's a big reason this bullet is favored by shooters who want match accuracy without a lot of fuss.
Will the 80.5gr Fullbore feed from an AR magazine?
Yes, the Fullbore Target was specifically designed for across-the-course shooting with AR platform target rifles where reliable magazine feeding is essential. Its boat tail profile and 1.091 inch overall length conform to SAAMI length specs, so it works well in magazine-fed applications.





Reviews
There are no reviews yet.