0
0

Bore Tech .22 CF Proof Positive Jag – Brass-Free Rifle Cleaning

UPC: 667739980296

$11.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who's run a copper solvent through a rifle knows the frustration: patch after patch keeps coming out blue, and you can't tell if you're chasing real fouling or just wearing down your jag. The Bore Tech .22 CF Proof Positive Jag fixes that headache by ditching brass entirely. Traditional jags are over 60% copper, so aggressive copper removers eat into the jag itself and paint your patches blue even when the bore is spotless. This one is machined from a proprietary brass-free alloy that's as soft as brass but tough enough to resist bending or snapping when you push a tight patch through.

What the Brass-Free Alloy Does for Your .22 CF

The whole point of this jag is trustworthy feedback. When your solvent is pulling copper and your patch turns blue, that blue is real. When the bore is clean, your patch stays clean. No more second-guessing whether you're done or if the jag is lying to you. The alloy also goes through a secondary treatment process, so it holds up to copper cleaners like Eliminator and stays barrel safe through years of use.

How the Proof Positive Jag Is Built

This isn't just a chunk of non-brass metal. It carries a dual set of contact rings machined to tight tolerances for even, concentric pressure against the bore. The lead ring on each set is rounded to self-center the jag as it enters, while the squared rings behind it grab the patch and keep it from slipping. The relief space between the rings even acts as a small solvent reservoir, feeding fresh solvent as the jag travels. A reverse taper at the rear gives a smooth, edge-free handoff to the rod and lifts it off the bottom of the barrel on the pull stroke, which keeps your crown protected.

The .22 CF jag is sized specifically for .22 centerfire bores and uses an 8-32 male thread, so it screws onto most standard cleaning rods. Pair it with correctly sized cotton patches and you've got clean, honest patches and a jag that'll outlast a drawer full of brass ones.

Key Specifications

  • Manufacturer: Bore Tech
  • Manufacturer Part Number: BTAJ-22-CF
  • UPC: 667739980296
  • Caliber: .22 Centerfire
  • Material: Proprietary brass-free alloy
  • Thread Size: 8-32 male
  • Length: Approximately 2.26 in
  • Design: Dual set of 4 contact rings with reverse taper
  • Country of Origin: USA

What’s Included

  • One Bore Tech .22 CF Proof Positive rifle patch jag

Frequently Asked Questions

Why does the .22 CF Proof Positive Jag stop false copper readings?

Standard brass jags are more than 60% copper, so copper-removing solvents attack the jag and turn your patches blue even when the bore is clean. This jag is machined from a brass-free alloy, so it doesn't react with copper cleaners. Blue on your patch means real copper in the barrel, not the jag.

Will this jag fit my cleaning rod?

It uses an 8-32 male thread, which is the common standard for centerfire rifle rods, so it threads onto most cleaning rods without any adapter. It's also designed to pair cleanly with Bore Tech's Proof Positive Bore Stix for an edge-free transition. Just confirm your rod is 8-32 if you're unsure.

What's the difference between the .22 CF and .22 rimfire jags?

The centerfire version has the dual bands of contact rings at the head to spike patches, which is what most centerfire cleaning calls for. The rimfire jag swaps those rings for two bands of knurling, since many rimfire folks prefer wrapping patches instead of spiking them. This CF model is the right pick for .22 centerfire rifles.

Is the brass-free alloy safe for my barrel and crown?

Yes. The alloy is as soft as brass but has higher tensile strength so it resists bending and snapping under a tight patch. The rounded lead ring self-centers the jag and the reverse taper lifts the rod off the bottom of the bore, both of which help protect the crown when used with the correct rod.

Additional information

UPC

667739980296

Manufacturer

Manufacturer Part Number

BTAJ-22-CF

Caliber/Gauge

.22 Caliber

Reviews

There are no reviews yet.

Be the first to review “Bore Tech .22 CF Proof Positive Jag – Brass-Free Rifle Cleaning”