0
0

Bore Tech Proof-Positive Bore Stix .22 Cal 44″ Rifle Cleaning Rod

UPC: 667739922449

$68.99

19 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Bore Tech Proof-Positive Bore Stix in .22 caliber is the kind of cleaning rod you buy once and forget about. It's a one-piece design with a caliber-specific spring steel core wrapped in a full-length epoxy coating that shrugs off solvents and won't peel or soften over time. That coating is smooth enough to spare your rifling but tough enough that grit won't embed in it and turn your rod into a lapping tool. If you've been running a cheap rod through a nice .22 barrel, this is the fix.

What Makes the Bore Stix Handle Different

The cushioned handle rides on 22 stainless steel ball bearings, so when you push a jag or brush down the bore, the rod spins freely and the patch tracks the rifling instead of dragging against it. That free rotation is the whole point. It keeps cleaning gentle and consistent, which matters a lot when you're working an accurate rimfire or varmint rig. Bore Tech also builds an index dot into the base of the handle so you can read your barrel's twist rate while you clean, a handy touch for anyone chasing load data or dialing in optics.

Sizing Up This .22 Cleaning Rod

The rod's working length is 44 inches, measured from the front of the handle to the tip, which makes it a good match for longer .22 rifles and bolt guns you want to clean from the breech. Keep in mind the overall length runs about 5.5 inches longer once you add the handle. The brass tip threads in the standard 8-32 pattern, so it plays nice with the jags, brushes, and adapters most folks already have in their kit.

Built for People Who Clean a Lot

Bore Tech has been turning out premium firearm care gear for a long time, and the Proof-Positive line is their top shelf. The caliber-specific core is sized to minimize flex and bow inside the bore, so you get straight, centered strokes that don't let the rod slap the lands. For anyone who takes barrel life seriously, this is a rod that earns its spot on the bench.

Key Specifications

  • Manufacturer: Bore Tech
  • Model: Proof-Positive Bore Stix
  • Manufacturer Part Number: BSTX-2244-00
  • UPC: 667739922449
  • Caliber: .22 Caliber
  • Application: Centerfire Rifle
  • Working Length: 44 in
  • Overall Length: Working length plus approx. 5.5 in for handle
  • Rod Material: Coated spring steel
  • Rod Coating: Full-length epoxy/polymer, solvent resistant
  • Handle: Cushioned aluminum on stainless steel ball bearings
  • Ball Bearings: 22 stainless steel
  • Tip Material: Brass
  • Thread Pattern: 8-32
  • Design: One-piece

What’s Included

  • One Bore Tech Proof-Positive Bore Stix .22 caliber 44" cleaning rod with ball-bearing handle

Frequently Asked Questions

Is the Bore Tech Bore Stix .22 rod for centerfire or rimfire?

This particular rod (BSTX-2244-00) is the centerfire version sized for .22 caliber rifles. Bore Tech makes a separate rimfire model that runs about 0.015 inches smaller in diameter to help clear ejectors and choked rimfire barrels. If you're cleaning a .223, .22-250, or similar centerfire, this is the one you want.

What does the 44 inch length actually mean on this cleaning rod?

The 44 inches is the working length of the rod, measured from the front of the handle to the tip. To get the true overall length, add roughly 5.5 inches for the handle. That working length makes it a good fit for full-size and long-barreled .22 rifles cleaned from the breech.

Why does the Bore Stix handle have ball bearings?

The 22 stainless steel ball bearings let the handle spin freely while the rod stays put in the bore. That means your jag or brush rotates with the rifling instead of dragging across the lands, which keeps cleaning gentle and protects your barrel. It's a big reason people upgrade from basic hardware-store rods.

Will my existing jags and brushes fit this Bore Tech rod?

Yes, the tip uses the standard 8-32 thread pattern, so most .22 caliber jags, brushes, and adapters will thread right on. The tip itself is brass to keep things easy on your bore. If your accessories are already 8-32, you're set.

Additional information

UPC

667739922449

Manufacturer

Manufacturer Part Number

BSTX-2244-00

Caliber/Gauge

.22 Caliber

Length

44

Style

Rifle

Reviews

There are no reviews yet.

Be the first to review “Bore Tech Proof-Positive Bore Stix .22 Cal 44″ Rifle Cleaning Rod”