Description
The OptiVISOR No. 3 is the DA-3 model from Donegan Optical, and it's a favorite on gunsmithing benches for good reason. This is a hands-free binocular headband magnifier that flips down when you need it and lifts up out of the way when you don't. The No. 3 lens plate delivers 1.75X magnification with a 14-inch focal length, which is one of the more comfortable working distances in the lineup. That extra room between your eyes and your work means you're not hunched right on top of a sight, a trigger job, or a set of tiny detent springs.
What the OptiVISOR DA-3 Brings to the Bench
The lenses here are real optical glass, ground and polished to prismatic standards rather than the stamped plastic you find in the cheap knockoffs. You get true three-dimensional depth perception with both eyes, which matters a lot when you're doing precision fitting or reading a faint serial number in an old deep-stamped font. The visor pivots on adjustable tension knobs so it stays put wherever you set it, and the whole rig weighs only about 4 ounces so you can wear it for a long session without your neck complaining.
Picking the Right OptiVISOR No. 3 Magnification
Remember that higher magnification always means a shorter working distance. The 1.75X No. 3 is a solid all-around choice when you want gentle magnification and plenty of hand room for file work, stoning, and general detail tasks. If you find yourself needing more power down the road, the lens plates swap out in seconds, so you're not locked into one strength.
The headband uses a dial adjustment that self-locks to fit just about any head size, and it wears comfortably over prescription or safety glasses. Machinists, jewelers, watchmakers, and gunsmiths have leaned on the OptiVISOR for decades, and it's proudly made in the USA by Donegan Optical.
Key Specifications
- Manufacturer: Donegan Optical (OptiVISOR)
- Manufacturer Part Number: DA-3
- Model: No. 3
- UPC: 633096000489
- Magnification: 1.75X
- Focal Length / Working Distance: 14 inches
- Lens Type: Precision-ground optical glass, prismatic
- Lens Plates: Interchangeable
- Headband: Dial-adjustable, self-locking, fits most head sizes
- Weight: Approximately 4 oz
- Fits Over Glasses: Yes, prescription or safety eyewear
- Country of Origin: USA
What’s Included
- OptiVISOR DA-3 headband magnifier frame with adjustable headband
- One 1.75X optical glass lens plate (No. 3)
Frequently Asked Questions
What magnification and working distance does the OptiVISOR No. 3 give me?
The No. 3 DA-3 lens plate provides 1.75X magnification at a 14-inch focal length. That 14-inch working distance is one of the roomier options in the OptiVISOR line, which leaves plenty of space between your eyes and the part you're working on. It's a good pick for file work, stoning, and general detail tasks where you want your hands clear of the piece.
Can I wear the OptiVISOR DA-3 over my glasses?
Yes. The OptiVISOR is designed to fit comfortably over prescription or safety eyewear. The dial-adjustable headband self-locks to conform to most head sizes, so you can dial it in over your existing glasses and get to work.
Are the lenses real glass or plastic?
The DA-3 uses genuine optical glass lenses that are ground and polished to prismatic standards. That's a big step up from the stamped acrylic lenses found in budget knockoffs, and it's why the image stays crisp and distortion-free across the field. Donegan builds these in the USA and they hold up to years of bench use.
Can I change the magnification later without buying a whole new visor?
You can. The OptiVISOR uses interchangeable lens plates that pop in and out in seconds, so you can add stronger or weaker lenses as your work demands. Just keep in mind that higher magnification always shortens your working distance, so pick the lowest power that gets the job done.




Reviews
There are no reviews yet.