Description
Getting a light or laser onto a Century Arms AK has always been a bit of a puzzle. The receiver uses a proprietary setup and the barrel profile doesn't play nice with off-the-shelf clamps. That's exactly the gap the RS Regulate BM-3 fills. It clamps directly to the .690-inch barrel section behind the gas block and gives you a short run of Picatinny rail to hang your gear on, no gunsmithing or full handguard replacement required.
What Sets the BM-3 Apart on a C39V2 or RAS47
This mount is machined from 6061 T6 aluminum and finished in a hardcoat anodized matte black, so it holds up to the kind of knocking around an AK sees. There are four Picatinny slots to work with, and the near-360-degree positioning means you can rotate it to 3 o'clock, 6 o'clock, 12, wherever your light or laser needs to sit. At roughly an ounce, it adds next to nothing up front, so your rifle still handles the way it should. In most cases it won't interfere with the cleaning rod either, which is a nice touch if you like keeping your AK stock-ish.
Fit and Compatibility Notes for the BM-3
It was built specifically for Century's C39V2 and RAS47 (and RAS-47) rifles, but since it keys off barrel diameter, it'll work on any AK-47, AK-74, or AKM with a .690-inch barrel in that spot. If you're running a weaponlight, laser, or even some smaller night vision gear, this gives you a solid, repeatable surface to clamp to.
Installation is straightforward. You clamp the BM-3 to the barrel, snug it down, and attach your accessory to the rail. RS Regulate has a strong reputation in the AK world for mounts that hold position and take abuse, and the BM-3 carries that same build quality into a simpler, barrel-mounted package.
Key Specifications
- Manufacturer: RS Regulate
- Manufacturer Part Number: BM-3
- UPC: 617395300310
- Model: C39V2 / RAS47
- Material: 6061 T6 Aluminum
- Finish: Hardcoat Anodized, Matte Black
- Mount Type: Picatinny Rail (4 slots)
- Style: Clamp-On
- Number of Bases: 1-Piece
- Fits Barrel Diameter: .690 inch O.D. behind gas block
- Weight: 0.9 oz
- Dimensions: 1.57 x 0.86 x 1.26 inches
- Made In: USA
What’s Included
- RS Regulate BM-3 barrel accessory mount
- Mounting hardware
Frequently Asked Questions
What rifles does the RS Regulate BM-3 fit?
The BM-3 was designed specifically for the Century Arms C39V2 and RAS47 (also listed as RAS-47) rifles. Since it clamps based on barrel diameter, it will also work on any AK-47, AK-74, or AKM with a .690-inch barrel at the mounting point behind the gas block. If you're unsure of your barrel size, measure the section just behind the gas block before ordering.
What can I mount on the BM-3?
The BM-3 gives you four slots of standard Picatinny rail, so anything that accepts a Picatinny-style mount will work. It's most commonly used for weaponlights and lasers, and it has enough real estate for some smaller accessories as well. Just attach your gear to the rail section and position the mount where you want it.
Can I adjust where the light or laser points?
Yes. The BM-3 offers near-360-degree positioning, so you can rotate the rail to the 3, 6, 9, or 12 o'clock position, or anywhere in between, before you lock it down. That flexibility lets you set your light or laser exactly where it's comfortable and out of the way of your support hand.
Does the BM-3 require a gunsmith to install?
No gunsmithing is needed. The BM-3 is a clamp-on design that secures directly to the barrel using the included hardware, so there's no drilling, tapping, or handguard swapping involved. Clamp it on, snug it down, and attach your accessory.




Reviews
There are no reviews yet.