Description
This is Redding's carbide size button upgrade kit built specifically for the 6.8mm Remington SPC (.277 bullet diameter). If you run a Redding Competition Bushing Neck Sizer Die and want to add a sizing button into the mix, this is the piece that makes it happen. It's designed for handloaders who care about repeatable neck tension and want the inside of the neck finished out smoothly without wrestling with lube.
The heart of the kit is a carbide size button that floats freely on the decapping rod. That free-floating design lets the button self-center as it passes through the case neck, which keeps everything concentric and takes a lot of the guesswork out of consistent neck tension. Because the button is carbide, it glides through dry brass without the galling or drag you'd fight with a standard steel button, so you can skip the inside-neck lubrication step entirely.
How the 6.8 SPC Carbide Kit Works With Your Die
This kit is an add-on, not a standalone die. It's made to work inside Redding's Competition Bushing Neck Sizer Die, which normally relies on the bushing alone to set neck diameter. Some loaders prefer to run a size button along with the bushing to true up the inside of the neck, and this carbide button handles that job cleanly. The free-floating setup keeps it aligned with the neck instead of forcing the brass off-center.
What Makes the Carbide Button Worth It for 6.8mm SPC Handloaders
The payoff is in consistency and convenience. Carbide means no lube, less effort on the press handle, and a smoother feel through each stroke. Over a loading session that adds up to cleaner brass, fewer steps, and neck tension you can count on from one case to the next. For anyone chasing tight groups out of a 6.8 SPC, small details like this are where accuracy lives.
The kit arrives with the carbide size button, a retainer to hold it in place on the rod, and a spare decapping pin so you're covered if one walks off during a session.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 99127
- UPC: 611760991271
- Caliber: .270 / 6.8mm Remington SPC (.277 bullet diameter)
- Type: Carbide Size Button Kit for Competition Bushing Neck Sizer Die
- Button Material: Carbide
- Button Design: Free-floating on the decapping rod for self-centering
- Lubrication: Not required for inside neck sizing
- Firearm Type: Rifle
- Quantity: 1 kit
What’s Included
- Carbide size button
- Retainer
- Spare decapping pin
Frequently Asked Questions
Is this Redding 6.8 SPC carbide kit a complete reloading die?
No, it's an accessory kit rather than a standalone die. It adds a carbide size button to Redding's Competition Bushing Neck Sizer Die for the 6.8mm SPC. You'll need that die to use it.
Do I still need to lube the inside of my case necks with this carbide button?
No, that's the main benefit of going carbide. The carbide size button glides through dry brass smoothly, so you can skip the inside-neck lubrication step. It cuts down on effort and keeps your brass cleaner.
How does the free-floating button help with accuracy on 6.8mm SPC brass?
The button floats on the decapping rod instead of being locked rigidly in place. That lets it self-center as it passes through the neck, keeping things concentric and delivering more consistent neck tension from case to case. For precision handloaders chasing tight groups, that consistency matters.
Will this fit a .270 caliber as well as 6.8mm SPC?
This kit is sized for the .277 bullet diameter shared by the 27 caliber / 6.8mm family. It's intended for use within a Redding Competition Bushing Neck Sizer Die set up for that bullet diameter. Match it to your specific die and cartridge before ordering.




Reviews
There are no reviews yet.