0
0

Redding 280 Ackley Improved Full Length Sizing Die (91428)

UPC: 611760914287

$43.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for the 280 Ackley Improved, this is the die that does the heavy lifting. The Redding full length sizing die works the body, shoulder, and neck of your fired brass in a single stroke, bringing cases back to standard dimensions so they drop into your chamber without a fight. It ships with a decapping rod assembly and neck expander (size button), so you're knocking out spent primers and setting neck tension at the same time you resize.

What the 280 AI Sizing Die Brings to Your Bench

Redding builds these from heat-treated alloy steel, and the sizing diameters are hand-polished to a surface hardness in the Rc 60-62 range. That finish is what makes the stroke feel smooth and keeps sizing effort down, which matters when you're running a full batch of brass. Tight machining tolerances also mean less case stretching and wear over time, so your brass lasts longer and your shoulder bump stays consistent from case to case.

Why a Dedicated 280 Ackley Improved Die Matters

The whole point of the Ackley Improved chamber is that steeper 40-degree shoulder and the extra powder room it opens up. You can fireform 280 Remington brass in an AI chamber, but once those cases are formed, you want dies cut for the Ackley geometry to size them correctly. This die holds the proper shoulder setback and body dimensions for the 280 AI, which keeps bolt-action feeding and extraction tight and your headspace where it should be.

Setting It Up

It uses the standard 7/8"-14 thread, so it threads right into any common single-stage or turret press. The decapping rod is adjustable, and setting your shoulder bump with a headspace comparator or gauge will get you dialed in for your specific rifle. Keep in mind this is a single sizing die, so you'll pair it with a seating die and the correct shell holder to round out your loading setup. Redding has been making reloading gear since 1946, and this die carries that same reputation for precision brass prep.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 91428
  • UPC: 611760914287
  • Caliber: 280 Remington Ackley Improved
  • Die Type: Full Length Sizing Die (Series A)
  • Thread: 7/8"-14
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62, hand-polished sizing diameters
  • Bullet Diameter: 0.284"
  • Shell Holder: #1 (not included)
  • Quantity: 1 Die

What’s Included

  • Redding 280 Ackley Improved Full Length Sizing Die
  • Decapping rod assembly with neck expander (size button)
  • Decapping pin
  • Lock ring

Frequently Asked Questions

Does the 280 Ackley Improved full length sizing die come with a shell holder?

No, the shell holder is sold separately. The 280 Ackley Improved uses a #1 shell holder, so you'll want to grab one if you don't already have it on your bench. The die itself includes the decapping rod assembly and neck expander.

What does a full length sizing die do that a neck die doesn't?

A full length die resizes the entire case, including the body, shoulder, and neck, bringing fired brass back to standard dimensions. This keeps cases chambering reliably in any rifle, which is why it's the go-to for hunting loads and bolt guns. A neck-only die just works the neck and leaves the body alone, which can eventually lead to tight chambering as brass grows.

Can I use this die for fireformed 280 Remington brass?

Yes. The 280 Ackley Improved is formed by firing 280 Remington ammo in an AI chamber, and once that brass is fireformed to the 40-degree shoulder, this die sizes it correctly for the AI geometry. Using a die cut for the Ackley chamber keeps your shoulder bump and headspace right for reloading.

Will this Redding die fit my press?

It uses the standard 7/8"-14 thread, so it fits virtually any common single-stage or turret press on the market. Setting it up with a headspace comparator will help you nail the proper shoulder setback for your specific chamber.

Additional information

UPC

611760914287

Manufacturer

Manufacturer Part Number

91428

Reviews

There are no reviews yet.

Be the first to review “Redding 280 Ackley Improved Full Length Sizing Die (91428)”