Description
If you're loading for a 7mm Remington Magnum and want flexibility on the bench, this Redding Deluxe 3-Die Set covers more ground than a standard two-die kit. It's a true three-die outfit built for bottleneck cases, giving you the ability to full length resize when you need brass to chamber across rifles, or neck size only when you're working fired brass back into the same gun and chasing a little extra case life and concentricity.
What the Redding 7mm Rem Mag Die Set Brings to the Bench
The set includes a full length sizing die, a neck sizing die, and a bullet seating die. The full length die uses a decapping rod assembly with a neck expander, so it sizes the body and neck while knocking out the spent primer in one stroke. The neck sizing die works only the case neck, which reduces how much you overwork the brass. The seating die features a built-in crimping ring and a proper seating plug, letting you run a crimp or leave it off depending on your load.
Fit, Build, and Everyday Use
Redding has been machining reloading gear in the USA since 1946, and that reputation for tight tolerances is exactly why so many precision loaders reach for these dies. All Redding dies use the industry standard 7/8-14 threaded bodies, so they'll thread right into any common single stage or turret press. The dies arrive in a storage box that doubles as a loading block, and tucked inside you'll find a spare decapping pin and a hex wrench to handle adjustments.
One thing worth noting up front: the shellholder is not included, so you'll want to grab the correct one for the 7mm Rem Mag case head if you don't already have it on hand. Pair these dies with quality brass and your favorite powder and bullet combo, and you've got a setup that turns out clean, consistent ammo load after load.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 84136
- UPC: 611760841361
- Cartridge: 7mm Remington Magnum
- Set Type: Deluxe 3-Die Set (bottleneck)
- Number of Dies: 3
- Dies Included: Full Length Sizing, Neck Sizing, Bullet Seating
- Thread: 7/8-14 standard
- Material: Steel
- Shellholder: Sold separately
- Country of Origin: USA
What’s Included
- Full length sizing die with decapping rod assembly and neck expander
- Neck sizing die
- Bullet seating die with built-in crimping ring and seating plug
- Spare decapping pin
- Hex wrench
- Storage box
Frequently Asked Questions
What dies come in the Redding 7mm Rem Mag Deluxe 3-Die Set?
This set includes a full length sizing die, a neck sizing die, and a bullet seating die. The full length die has a decapping rod with a neck expander, the neck die sizes only the case neck, and the seater has a built-in crimping ring. It's a nice balance for loaders who want both sizing options on hand.
Does this set include a shellholder?
No, the shellholder is sold separately. You'll want to pick up the correct shellholder for the 7mm Remington Magnum case head if you don't already have one in your kit. The box does have a spot to store it once you do.
Will these dies fit my press?
Yes. All Redding dies use the industry standard 7/8-14 threaded bodies, so they'll thread into virtually any common single stage, turret, or progressive press. No special adapters needed.
What's the difference between this Deluxe set and the Premium Deluxe set?
This Deluxe set (part number 84136) uses a standard full length sizing die and a standard seating die alongside the neck sizing die. The Premium Deluxe version adds a carbide sizing button and a micrometer seating head for finer adjustment. This one covers everything most handloaders need without the extra features.





Reviews
There are no reviews yet.