0
0

Redding Titanium Nitride Neck Sizing Bushing .233 (76233)

UPC: 611760762338

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .233 diameter bushing from Redding's Titanium Nitride line, built for handloaders who care about neck tension and want their sizing to be repeatable round after round. It drops right into any Redding bushing style neck sizing die, so if you're already running a Type S setup, this slips in and gets to work.

The whole point of a bushing die system is control. Instead of over-working your brass with a one-size-fits-all expander, you pick the exact bushing diameter that gives your loaded round the right amount of grip on the bullet. This .233 bushing carries the standard 1/2 inch outside diameter and 3/8 inch length that every Redding bushing shares, and it's clearly marked with the size so you're never guessing when you pull it out of the box.

What the TiN Coating Brings to the .233 Bushing

Underneath, this is heat treated steel hand polished to a surface hardness of Rc 60-62, which is already slick. The Titanium Nitride surface treatment takes it further, pushing effective surface hardness up around Rc 85 and noticeably cutting friction as the case neck passes through. That means less effort on the press handle and a smoother feel, especially if you're sizing a lot of brass in one sitting. The gold colored coating is also easy to spot in a storage box full of bushings.

Picking the Right .233 for Your Load

Bushing selection is simple once you know the trick. Measure the neck diameter of a loaded or dummy round with a good micrometer, then subtract about .001 inch to account for brass spring back and create a proper press fit on the bullet. A .233 bushing works out well for a loaded neck measuring around .234. If your cases run uneven neck wall thickness, you may want to drop a thousandth or two and finish with a sizing button. Always test your results by seating a bullet and making sure it holds firm without pushing deeper into the case.

Redding makes these in .001 inch steps across the full .185 to .368 range, so it's worth keeping a few sizes on hand as you develop a load. This is made in the USA and interchanges freely with Wilson style bushings too.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76233
  • UPC: 611760762338
  • Bushing Diameter: .233"
  • Style: Titanium Nitride (TiN) Coated
  • Base Material: Heat Treated Steel
  • Outside Diameter: 1/2"
  • Length: 3/8"
  • Base Surface Hardness: Rc 60-62
  • Coated Surface Hardness: Approx. Rc 85
  • Compatibility: All Redding bushing style neck sizing dies; interchanges with Wilson style
  • Size Range Offered: .185" to .368" in .001" increments
  • Country of Origin: USA

What’s Included

  • One (1) Redding .233 Titanium Nitride neck sizing bushing

Frequently Asked Questions

What dies does the Redding .233 Titanium Nitride bushing fit?

It fits all Redding bushing style neck sizing dies, including the popular Type S series. It also interchanges freely with Wilson style bushings. The die itself is sold separately.

How do I know if .233 is the right bushing size for my brass?

Measure the neck diameter of a loaded or dummy round with a micrometer, then subtract about .001 inch for spring back. A .233 bushing generally pairs with a loaded neck measuring around .234. Always confirm by seating a bullet and checking that it holds firm without moving deeper into the case.

What's the difference between the Titanium Nitride bushing and the plain steel version?

Both start as heat treated steel polished to Rc 60-62, and they share the same dimensions and fit. The Titanium Nitride version adds a surface coating that raises effective hardness to roughly Rc 85 and reduces friction, so sizing feels smoother and the brass passes through with less effort.

Will one bushing handle my whole load workup?

Often you'll want a couple of neighboring sizes on hand while developing a load, since neck tension affects accuracy and may need fine tuning. Redding offers these in .001 inch steps, so grabbing the sizes just above and below your target makes it easy to experiment and settle on the best fit.

Additional information

UPC

611760762338

Manufacturer

Manufacturer Part Number

76233

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .233 (76233)”