0
0

Redding 73 Style Steel Neck Sizing Bushing .362 (MPN 73362)

UPC: 611760733628

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .362 diameter bushing from Redding's 73 Style steel lineup, the part the company tracks as MPN 73362. It's a precision-machined neck sizing bushing built from heat-treated steel, with the sizing surface hand polished to a hardness of Rc 60-62 so the brass glides through with less effort and less drag. The whole idea behind running a bushing like this is control. Instead of oversizing your necks and then springing them back out with an expander, you pick a bushing sized to your brass and bullet combo and size the neck exactly as much as you want, which keeps the brass working less and helps it last longer.

How the .362 Bushing Fits Your Setup

The 73 Style steel bushings carry standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so this one freely interchanges across all Redding bushing-style dies, including the Type S neck sizing and Type S full-length designs. It also swaps in with Wilson-style bushings if that's what you're running. Each bushing is clearly marked with its size, so when you've got a few in the drawer there's no guesswork about which one you're grabbing.

Dialing In Neck Tension With the 73362

Picking the right size is simple math. Measure the outside neck diameter of a loaded round, then subtract a couple thousandths to account for brass spring-back and the grip you want on the bullet. That lands you at your bushing number, and the .362 covers you right in that upper range. Redding offers these in .001 inch increments from .185 all the way to .368, so a lot of handloaders keep a small spread of sizes on hand to fine-tune tension as their brass work-hardens over several firings.

Steel bushings like this one are the workhorse choice for precision reloading. They're made in the USA and hold their dimensions firing after firing, which is exactly what you want when you're chasing consistent seating and tight groups at the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73362
  • UPC: 611760733628
  • Style: 73 Style Steel Neck Sizing Bushing
  • Sizing Diameter: .362 in
  • Material: Heat-treated steel
  • Surface Hardness: Rc 60-62
  • External Dimensions: 1/2 in O.D. x 3/8 in long
  • Sizing Finish: Hand polished
  • Compatibility: All Redding bushing-style dies; interchanges with Wilson-style bushings
  • Size Range Available: .185 in to .368 in in .001 in increments
  • Country of Origin: USA

What’s Included

  • One Redding 73 Style .362 steel neck sizing bushing

Frequently Asked Questions

Which dies does the Redding .362 steel bushing fit?

It fits all Redding bushing-style dies, including the Type S neck sizing and Type S full-length resizing dies. With its standard 1/2 inch O.D. by 3/8 inch long dimensions, it also interchanges with Wilson-style bushings. Dies are sold separately from the bushing.

How do I know if .362 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded cartridge, then subtract a couple thousandths of an inch to allow for brass spring-back and the grip needed to hold the bullet. The result is your ideal bushing size. Many handloaders keep a few sizes on hand since brass dimensions shift as cases work-harden over repeated firings.

What's the difference between the steel 73 Style bushing and the titanium nitride version?

Both share the same dimensions and interchange in the same dies. This 73 Style steel bushing is heat treated and hand polished to Rc 60-62 hardness. The titanium nitride version adds a surface coating that further boosts hardness and cuts sizing friction, while the steel version remains the proven everyday workhorse.

Does this bushing come with an expander or decapping assembly?

No, this is the bushing only. The expander button and decapping rod come with the Type S dies themselves, not with individual bushings. Many precision reloaders actually run bushing dies without the expander so the neck is sized purely by the bushing you select.

Additional information

UPC

611760733628

Manufacturer

Manufacturer Part Number

73362

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .362 (MPN 73362)”