0
0

Redding 73 Style Steel Neck Sizing Bushing .329 (73329)

UPC: 611760733291

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Precision reloaders know that neck tension is where accuracy either comes together or falls apart, and that is exactly the job this Redding .329 steel bushing was built for. It lets you size the case neck down just enough to hold a bullet securely, without working the brass harder than it needs to be. Less overworking means longer case life and more consistent seating, which usually translates to tighter groups downrange.

This one is machined from heat-treated steel, and the sizing diameter is hand polished to a surface hardness of Rc 60-62. That hard, slick finish cuts down on sizing effort and helps the bushing hold its dimensions over a long working life. The part number 73329 tells you the size right in the digits, with the last three numbers indicating the .329 inch inside diameter.

Where the Redding .329 Steel Bushing Fits

Like the rest of the 73 series, this bushing carries the standard half-inch outside diameter and three-eighths-inch length, so it drops into any Redding bushing-style neck sizing or full-length sizing die. It also plays nice with other bushing dies on the market that are built to the same spec, including Wilson and Whidden setups, which makes it an easy addition if you already run a bushing die.

Picking the Right Redding Bushing Size

Getting the size right is simple. Measure the outside neck diameter of a loaded round using a good micrometer, then subtract about .001 inch to land roughly .001 inch of neck tension. If you shoot moly-coated bullets or want a firmer grip, stepping down another thousandth or two gets you there. Many handloaders keep a few sizes on hand so they can tune tension to a specific brass and bullet combo, and the .329 is a common pick for larger calibers in the .33 family.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73329
  • UPC: 611760733291
  • Bushing Style: 73 Style Steel
  • Inside Diameter: .329 in
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Material: Heat-treated steel
  • Surface Hardness: Rc 60-62, hand polished
  • Compatibility: All Redding bushing-style sizing dies
  • Country of Origin: USA

What’s Included

  • One Redding 73 Style .329 steel neck sizing bushing

Frequently Asked Questions

What dies does the Redding .329 steel bushing fit?

It fits any Redding bushing-style neck sizing or full-length sizing die. Because it uses the standard half-inch outside diameter and three-eighths-inch length, it also works in other common bushing dies built to the same spec, such as Wilson and Whidden. The bushing is sold on its own, so your die and shellholder are separate.

How do I know if .329 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded round with a quality micrometer, then subtract about .001 inch to get roughly .001 inch of neck tension. If that measurement lands near .330, the .329 bushing is a solid starting point. Measuring several rounds and using the average gives you the most reliable number.

What is the difference between the steel and titanium nitride Redding bushings?

This is the heat-treated steel version with a hand-polished surface at Rc 60-62 hardness. The titanium nitride bushings add a coating that further increases surface hardness and reduces sizing friction, but the steel bushings share the same dimensions and interchange freely in the same dies.

Will this bushing help my case life?

Yes. By sizing the neck down only as much as needed to hold the bullet, a bushing avoids overworking the brass the way a traditional one-size expander ball setup can. Less repeated stretching and squeezing means your cases typically last more firings before the necks start to split.

Additional information

UPC

611760733291

Manufacturer

Manufacturer Part Number

73329

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .329 (73329)”