Description
This is the .284" heat-treated steel neck sizing bushing from Redding, part number 73284. If you shoot 7mm or anything else that lives around that neck diameter, this is the piece that lets you size your case necks down to exactly where you want them instead of overworking the brass with a standard die. The sizing surface is hand-polished to a surface hardness of Rc 60-62, which cuts down on sizing effort and helps the bushing hold its dimension over a long reloading career.
Where the .284 Bushing Fits In
This bushing shares the standard 1/2" outside diameter by 3/8" long body, so it drops into and freely interchanges across all Redding bushing-style dies, including the Type S neck and Type S full-length sizing dies. Because the bushing floats in the die, it self-centers on the case neck, which is a big part of why these setups produce such consistent runout numbers. The .284 is clearly marked with its size right on the bushing, so there's no guessing when you have a drawer full of them.
Getting Your Neck Tension Right with the 73 Style Bushing
Picking the correct size is straightforward. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001" to .002" to allow for brass spring-back and proper bullet grip. That final number is your bushing size. Running .284 means your loaded necks are typically measuring in the .285 to .286 range, which is common territory for 7mm builds depending on your brass and neck wall thickness. If you shoot moly-coated bullets, some handloaders step down a thousandth or two for a touch more grip.
The real payoff here is control and brass longevity. By sizing only the outside of the neck to a precise diameter and skipping the expander ball pull-through, you put far less stress on the case neck. That translates to straighter necks, more uniform tension round to round, and brass that lasts noticeably longer. Made in the USA by one of the most respected names in precision reloading.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73284
- UPC: 611760732843
- Bushing Diameter: .284"
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- Finish: Hand-Polished Sizing Diameter
- Body Dimensions: 1/2" O.D. x 3/8" Long
- Style: 73 Style Neck Sizing Bushing
- Compatibility: All Redding Bushing-Style Dies
- Country of Origin: USA
What’s Included
- One (1) Redding .284" heat-treated steel neck sizing bushing (73284)
Frequently Asked Questions
What dies does the Redding .284 steel bushing fit?
It fits all Redding bushing-style sizing dies, including the Type S neck sizing and Type S full-length sizing dies. The standard 1/2" O.D. by 3/8" long body freely interchanges between them, so you can swap sizes without any extra parts. The bushing floats and self-centers on the case neck for consistent results.
How do I know if .284 is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge with a micrometer, then subtract .001" to .002" for brass spring-back and bullet tension. If that math lands on .284, this is your bushing. Loaded necks measuring roughly .285 to .286 generally pair well with the .284, though your brass and neck wall thickness will fine-tune it.
What's the difference between this steel bushing and the titanium nitride version?
Both are heat-treated hardened steel with hand-polished sizing surfaces at Rc 60-62 hardness, and both interchange in the same dies. The titanium nitride version adds a TiN coating that increases surface lubricity to reduce sizing friction. This 73284 is the standard heat-treated steel model without the TiN coating.
Why use a bushing instead of a standard sizing die?
A bushing die sizes only the outside of the case neck to a precise diameter and skips the expander ball pull-through, which puts much less stress on the brass. That means straighter necks, more uniform neck tension, and brass that lasts longer. It also gives you the control to tune neck tension in .001" increments by swapping bushings.





Reviews
There are no reviews yet.