Description
This is the .233" steel bushing from Redding's 73 series, part number 73233, and it's the little piece that lets you take real control over neck tension on your handloads. Instead of being stuck with whatever a standard full-length die gives you, you pick the exact bushing diameter that sizes your case necks just enough to hold the bullet securely without overworking the brass. Less overworking means longer case life and more consistent neck tension round to round, which is exactly what precision handloaders are chasing.
How the Redding .233 Steel Bushing Works
These bushings are made from heat-treated steel with the sizing diameter hand-polished to a surface hardness of Rc 60-62. That hard, slick surface cuts down on sizing effort and helps the bushing hold its dimension over thousands of rounds. Every Redding neck bushing shares the same external footprint of 1/2" outside diameter by 3/8" long, so this .233 drops into any Redding bushing-style neck sizing die and swaps out freely as you fine-tune your load.
Picking the Right Bushing Size
Figuring out which bushing you need is straightforward. Measure the outside diameter of a loaded cartridge neck (bullet seated) with a good micrometer, then subtract about .001" to land on your bushing size. If you're running moly-coated bullets, you may want to go .001" or .002" tighter. The .233 here is a common fit for a lot of .20 and .22 caliber loads, but always confirm against your own loaded rounds since brass and bullet combinations vary.
Why Handloaders Reach for the 73 Style Bushing
Redding bushings have a strong reputation among folks who load for accuracy, and this steel version is the workhorse of the lineup. It's made in the USA, clearly marked with the size so you're never guessing, and priced right for building out a set across the diameters you shoot. If you already run a Redding Type S or Competition bushing die, adding the sizes you need is one of the easiest upgrades you can make to tighten up your groups.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73233
- UPC: 611760732331
- Bushing Diameter: .233"
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2" OD x 3/8" Long
- Style: 73 Style Steel Neck Sizing Bushing
- Fitment: Redding Bushing-Style Neck Sizing Dies (Type S & Competition)
- Finish: Hand-Polished Sizing Diameter
- Country of Origin: USA
What’s Included
- One Redding 73 Style .233 steel neck sizing bushing
Frequently Asked Questions
Which dies does the Redding .233 steel bushing fit?
This bushing is designed to fit Redding bushing-style neck sizing dies, including the Type S and Competition die lines. All Redding neck bushings share the same 1/2" OD by 3/8" long external dimensions, so they interchange freely within those dies. You just drop in the diameter you need for the load you're working on.
How do I know if the .233 size is right for my load?
Measure the outside diameter of a loaded cartridge neck with a bullet seated using a precision micrometer, then subtract about .001" to find your ideal bushing size. If that math lands you at .233, this is your bushing. Keep in mind that different brass and bullet combinations can shift that number, so it's worth confirming against your own loaded rounds.
What's the difference between the steel and titanium nitride versions?
Both share the same dimensions and function, but the steel 73 style bushing is the standard heat-treated option hardened to Rc 60-62. The titanium nitride version (76 series) adds a TiN coating to further increase surface hardness and reduce sizing friction. For most handloaders the steel bushing works great and is the more budget-friendly choice.
Do I need a tighter bushing for moly-coated bullets?
Yes, moly-coated bullets typically call for slightly tighter neck tension. Redding recommends dropping down .001" or .002" from your standard bushing size when running moly. If you shoot moly with .233 necks, you may want to grab a .232 or .231 instead.





Reviews
There are no reviews yet.