Description
This three-die set is Redding's answer for reloaders running a progressive press who refuse to compromise on precision. The NxGEN Competition Pro Series pairs a lube-free carbide sizing die with a top-tier micrometer seating die, giving you the kind of repeatable results that competition loads demand. Both .40 S&W and 10mm Auto share the same case dimensions, so one set covers both cartridges.
What Sets the NxGEN Competition Pro Carbide Set Apart
The heart of this set is the NxGEN Carbide Sizing Die. It uses an ultra-hard carbide ring that sizes your brass without any case lube, which keeps your workflow clean and extends case life. There's no expander die in the box, and that's by design. Most popular progressive machines flare the case mouth right at the powder drop station, so Redding left it out to keep things streamlined. All three dies feature a large radius at the mouth for easy case entry, which is exactly what you want when brass is cycling fast through a progressive.
Micrometer Seating That Takes the Guesswork Out
The Competition Bullet Seating Die is the real upgrade here over a standard Pro Series set. It has a top-mounted micrometer calibrated in .001 inch increments, so you can set, record, and return to your preferred seating depth in seconds. A free-floating bullet sleeve holds the bullet and case in perfect alignment before seating begins, which cuts down bullet runout and tightens up your overall length consistency. Reloaders who run these on Dillon presses consistently point to that micrometer as the feature that makes dialing in different bullet weights painless.
Crimping Done Right in a Separate Step
Redding keeps crimping separate from seating because that's how you get the cleanest result. This set includes a dedicated Profile Crimp Die, or a Taper Crimp Die for cartridges that headspace on the case mouth, so you get proper bullet tension without biting into the case or throwing off your accuracy. The whole set is made in the USA and ships in a plastic storage case with a spare decapping pin. Keep in mind the shellholder is sold separately.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 58253
- UPC: 611760582530
- Caliber: .40 S&W / 10mm Auto
- Product Type: Competition Pro Series Carbide 3-Die Set
- Number of Dies: 3
- Dies Included: NxGEN Carbide Sizing Die, Competition Seating Die, Crimp Die
- Sizing Die: NxGEN Titanium Carbide (lube-free), with decapping unit
- Seating Die: Micrometer adjustable in .001" increments
- Crimp Style: Profile Crimp (Taper Crimp for case-mouth headspacing cartridges)
- Expander Die: Not included (by design for progressive presses)
- Intended Use: Progressive reloading presses
- Thread: 7/8"-14
- Shellholder: Sold separately
- Country of Origin: Made in the USA
What’s Included
- NxGEN Titanium Carbide Sizing Die with decapping unit
- Competition Bullet Seating Die with micrometer adjustment
- Profile Crimp Die (or Taper Crimp Die depending on caliber)
- Spare decapping pin
- Plastic storage case
Frequently Asked Questions
Why doesn't the Competition Pro Carbide set include an expander die?
It's left out on purpose. Most popular progressive machines flare the case mouth at the powder drop station, so a separate expander die is redundant on that kind of setup. If you ever want to run these dies on a single stage in the conventional way, you can add Redding's expander die separately.
Does the carbide sizing die require case lube?
No. The NxGEN carbide ring sizes straight-wall handgun brass without any lubrication, which keeps your process clean and helps extend case life. That's one of the biggest reasons reloaders pick a carbide set for high-volume .40 S&W and 10mm Auto loading.
What makes the Competition Pro set different from the standard Pro Series?
The upgrade is the seating die. The Competition Pro set uses a micrometer bullet seating die with a free-floating sleeve that aligns the bullet and case before seating, reducing runout and letting you set overall length in .001 inch increments. The standard Pro Series uses a simpler seating die without the micrometer.
Is a shellholder included with this die set?
No, the shellholder is sold separately. You'll need the correct shellholder for .40 S&W and 10mm Auto to run these dies on your press. It's a quick add-on if you don't already have one in your kit.





Reviews
There are no reviews yet.