Description
If you've chased the last little bit of accuracy out of your 300 Win Mag loads, you already know where it hides: the neck. Redding's Competition Bushing Neck Die (part 56153) is built to attack that exact detail. Rather than squeezing the neck down hard and then dragging an expander back through it, this die uses an interchangeable bushing to size the neck just enough to hold the bullet. That means less working of the brass, straighter necks, and a run of cases that lasts longer and shoots more consistently round after round.
The heart of the design is a precision ground sliding sleeve that captures and supports the case before any sizing begins. As the case rises, the bushing self-centers on the neck while the decapping rod stays aligned by the die's internal parts, almost like a firing pin riding in its channel. The result is seriously concentric necks with minimal runout, which is the whole point when you're loading for a long-range magnum.
Dialing In the 300 Win Mag Bushing Neck Die
The micrometer adjustment head lets you set exactly how much of the neck gets sized and come right back to a favorite setting later. It's the kind of repeatability that makes load development a lot less frustrating. For the 300 Win Mag, the usable bushing range runs from about .330 up to .338, so you've got room to tune neck tension to your brass and bullet combo.
What You'll Need Alongside This Die
Worth knowing up front: bushings and the shellholder are sold separately, which is standard for this style of die. To pick the right bushing, measure the outside neck diameter of a few loaded rounds, take the smallest average, and subtract about .001 inch. Moly-coated bullets sometimes call for a touch tighter. The die was built for reloaders who prep their brass carefully and skip the sizing button, though Redding does offer carbide button kits if you'd rather run one. Made in the USA by a company that's been engineering reloading gear since 1946, it's a tool that earns its place on a serious press.
Key Specifications
- Manufacturer: Redding Reloading
- Manufacturer Part Number (MPN): 56153
- UPC: 611760561535
- Caliber: 300 Winchester Magnum
- Die Type: Competition Bushing Neck Sizing Die
- Quantity: 1 Die
- Adjustment: Micrometer bushing position head
- Bushing Range: 0.330 to 0.338
- Bushings Included: No, sold separately
- Shellholder Included: No, sold separately
- Gun Type: Rifle
- Country of Origin: USA
What’s Included
- One Redding Competition Bushing Neck Sizing Die with precision ground sliding sleeve and micrometer adjustment head
Frequently Asked Questions
Does the 300 Win Mag Competition Bushing Neck Die come with bushings?
No, bushings are sold separately so you can match neck tension to your exact brass and bullet. For the 300 Win Mag, the die accepts bushings roughly from .330 to .338. Redding bushings are standard, and Hornady, RCBS and Wilson bushings are also compatible.
How do I pick the right bushing size for this die?
Measure the outside neck diameter of several loaded or dummy rounds with a precision micrometer, then take the smallest average and subtract about .001 inch. That figure is your starting bushing size. If you shoot moly-coated bullets, you may want to go .001 or .002 tighter.
Do I need a sizing button with the Competition Bushing Neck Die?
No. The die was designed for handloaders who carefully prep their brass and prefer to skip the expander button entirely, which reduces how much the neck gets worked. If you'd still like to run one, Redding offers carbide size button kits separately.
What makes this bushing neck die more accurate than a standard neck sizer?
A precision ground sliding sleeve captures and supports the case before sizing starts, and the bushing self-centers on the neck as the case moves up. The decapping rod stays aligned by the die's internal parts, which keeps runout low. The micrometer head also lets you return to a proven setting any time.





Reviews
There are no reviews yet.