Description
If you're chasing tighter groups out of your 45 Colt or big-bore 454 Casull, the seating step is where a lot of accuracy is won or lost. Redding built this Competition Seater Die (part number 55191) to take the guesswork out of that step. Instead of a loose seating plug that lets the bullet wander, this die uses a precision-ground, spring-loaded seating stem that drops down into a close-fitting sleeve and biases the bullet into line with the case before seating actually starts. That alignment is held all the way up until the bullet is home, which cuts down on runout and the inconsistency that comes with it.
What Sets the 55191 Competition Seater Die Apart
The heart of this die is Redding's patented alignment system. The bullet guide and seating stem are honed to nearly the same diameter as a jacketed bullet, so tight that the stem and bullet will literally float on a trapped column of air during the famous Redding demonstration. Because the stem floats independently of the micrometer, the die holds the bullet concentric with the case without error creeping in from the rest of the assembly. The result is the kind of straight-line seating that bench-rest and precision handgun crowds look for.
Dialing In Seating Depth
Up top you get a micrometer calibrated in .001" increments, with each full turn moving the stem .050". That makes setting, recording, and repeating a seating depth simple, which is a real help if you load more than one bullet or like to test different seating depths. One thing worth knowing: this is a dedicated seater with no crimp function. Redding left crimping out on purpose, since serious handloaders get better results crimping as a separate step with a Profile Crimp or Taper Crimp die.
Press Fit and Setup
The die uses the industry-standard 7/8"-14 thread and runs in any press cut for it. The body threads are slightly extended for full lock-ring engagement, and an oversize bellmouth chamfer at the bottom helps feed cases and bullets smoothly, which matters if you're running a progressive. For reference, 45 Colt and 454 Casull use a Redding #23 shellholder.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55191
- UPC: 611760551918
- Die Type: Competition Bullet Seating Die
- Caliber: 45 Colt / 454 Casull
- Bullet Diameter: .452"
- Thread: 7/8"-14
- Micrometer Adjustment: .001" increments (.050" per revolution)
- Alignment: Patented spring-loaded, precision-ground seating stem
- Crimping: None (dedicated seater)
- Shellholder: Redding #23
- Press Compatibility: Single-stage and progressive presses
What’s Included
- Redding Competition Seater Die (55191)
- Micrometer seating adjustment
- Lock ring
- Operating instructions
Frequently Asked Questions
Does the Redding Competition Seater Die also crimp?
No. This is a dedicated seating die with no crimp function built in. Redding leaves crimping off on purpose, since separating the two operations produces more consistent results. If you want to crimp, pair it with a Redding Profile Crimp or Taper Crimp die for 45 Colt / 454 Casull.
Will the 55191 work on a progressive press?
Yes. It uses the standard 7/8"-14 thread and runs in any press cut for it, including single-stage and progressive setups. Redding added an oversize bellmouth chamfer at the bottom of the die to ease case and bullet entry, which is especially handy on a progressive.
How precise is the micrometer on this seating die?
The micrometer is calibrated in .001" increments, so every small mark moves the stem one thousandth of an inch, and a full revolution equals .050". That makes it easy to set, record, and return to an exact seating depth. It's a big help if you load more than one bullet weight or like to test seating depths.
What shellholder do I need for 45 Colt and 454 Casull?
Both 45 Colt and 454 Casull use the Redding #23 shellholder. The shellholder is not included with the die, so you'll want to grab one separately if you don't already have it in your setup.




Reviews
There are no reviews yet.