0
0

Redding 7mm Rem SAUM Type S-Match Bushing Full Length Die Set

UPC: 611760362804

$207.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding's Type S-Match Bushing Full Length Die Set for the 7mm Remington SAUM is built for reloaders who care about consistency round after round. This is a two-die set that pairs a Type S bushing-style full-length sizing die with Redding's Competition Seating Die, so you get full case body sizing and precise neck tension control in a setup that feeds and chambers cleanly. It's the kind of tooling that competition and precision bolt gun folks reach for when factory ammo and basic dies just won't cut it anymore.

What the Type S Bushing Sizing Die Does

Instead of relying on a fixed expander ball to set neck diameter, the sizing die uses interchangeable steel bushings available in .001 inch increments. You pick the bushing that gives you the neck tension you want, which means less brass working, better concentricity, and longer case life. The adjustable decapping rod lets you position the bushing to size only part of the neck when you want partial neck sizing. The die ships with a decapping rod, a standard sizing button, and a decapping pin retainer so you can run it without the button if you turn your necks. Pull the bushing and internals and it even works as a body die.

Seating Depth You Can Trust with the Competition Die

The Competition Seating Die is where this set really earns its keep. A sliding sleeve supports and aligns the case and bullet before seating begins, which keeps runout low and your rounds straight. The micrometer head is calibrated in .001 inch increments and adjusts smoothly, so repeating a load or chasing the lands is quick and repeatable.

Fit and a Note on Bushings

Both dies are machined specifically to 7mm Remington Short Action Ultra Magnum dimensions and are not interchangeable with other cartridges. Keep in mind the neck bushings and shellholder are sold separately, so you'll want to measure a loaded round and order the right bushing to match your brass and desired tension.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36280
  • UPC: 611760362804
  • Cartridge: 7mm Remington Short Action Ultra Magnum (SAUM)
  • Die Set Type: Type S-Match Bushing Full Length, 2-Die Set
  • Dies Included: Type S Bushing Full Length Sizing Die, Competition Seating Die
  • Neck Sizing Method: Interchangeable bushings in .001 inch increments
  • Seating Adjustment: Micrometer head, .001 inch increments
  • Material: Steel
  • Thread: 7/8-14
  • Bushings Included: No, sold separately
  • Shellholder Included: No, sold separately

What’s Included

  • Type S Bushing Full Length Sizing Die
  • Decapping rod
  • Standard sizing button
  • Decapping pin retainer
  • Competition Seating Die with micrometer head and sliding sleeve
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does this 7mm SAUM Type S-Match set come with bushings?

No, the neck bushings are sold separately so you can match them to your exact brass and desired neck tension. Redding offers steel bushings in .001 inch increments. Measure the neck diameter of a loaded round, then subtract the tension you want to find the right bushing size.

Does the sizing die still full-length size the case body?

Yes. Unlike a neck-only bushing die, this Type S die full-length sizes the case body and sets the shoulder while the bushing controls neck tension in the same stroke. That gives you reliable chambering along with the precision benefits of bushing-controlled necks.

Can the sizing die be used as a body die?

It can. Remove the bushing and the internal parts and the Type S die functions as a body die, sizing the case body and shoulder without touching the neck. That makes it a flexible tool if you also neck size separately or turn your necks.

Is this die set specific to 7mm Remington SAUM?

Yes. Both dies are machined to 7mm Remington Short Action Ultra Magnum case dimensions and are not interchangeable with other cartridges. A shellholder is also sold separately and should match the 7mm SAUM case head.

Additional information

UPC

611760362804

Manufacturer

Manufacturer Part Number

36280

Reviews

There are no reviews yet.

Be the first to review “Redding 7mm Rem SAUM Type S-Match Bushing Full Length Die Set”