Description
The Redding #3 VLD Bullet Seating Micrometer is a direct replacement seat plug that converts a standard Redding seating die into a precision micrometer-adjustable tool. Instead of guessing at seating depth with trial and error, you get a true micrometer dial that reads in thousandths of an inch, so you can nail down your cartridge overall length and repeat it load after load. The VLD designation means the plug is cut for the longer, pointier Very Low Drag style bullets, which keeps their fragile tips and ogives from getting marred during seating.
Where the #3 VLD Seat Plug Fits
The #3 group is built for the .338 family of cartridges. It covers rounds like the 338 Winchester Magnum, 338 Remington Ultra Magnum, 340 Weatherby Magnum, 338-06, 338 Lapua Magnum, and the 338-378 Weatherby Magnum. If your seating plug carries the #3 number, this is the matching micrometer. Redding keeps the numbering consistent across their lineup, so swapping is as simple as matching the number on your current plug to the micrometer.
Why Handloaders Reach for the VLD Micrometer
Folks running match and long-range bullets tend to appreciate what this plug does for consistency. Shooters loading Hornady ELD Match, Nosler RDF, and similar long-ogive projectiles report clean seating with no pressure rings, even when compressing heavy powder charges. That repeatable seating depth is a big deal when you are chasing tight groups and trying to tune your distance off the lands.
The micrometer is machined from steel alloy, threaded 1/2-20 to fit Redding seating dies that use that standard seat plug thread. It is a straightforward, no-nonsense upgrade that brings competition-level adjustability to a die you already own. Give your .338 loads the fine-tuning they deserve and lock in that seating depth with confidence.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 09163
- UPC: 611760091636
- Seat Plug Number: #3
- Bullet Profile: VLD (Very Low Drag)
- Adjustment Increment: 1/1000th of an inch
- Thread: 1/2-20
- Material: Steel alloy
- Cartridge Group: 338 Win Mag, 338 Rem Ultra Mag, 340 Wby Mag, 338-06, 338 Lapua Mag, 338-378 Wby Mag
- Readout: Inches and millimeters
- Country of Manufacture: United States
- Quantity: 1
What’s Included
- Redding #3 VLD Bullet Seating Micrometer (seat plug with micrometer adjustment)
Frequently Asked Questions
What dies does the #3 VLD Bullet Seating Micrometer work with?
It fits Redding seating dies that use a seat plug with 1/2-20 threads, which is their standard seat plug thread. It is a direct replacement for the original plug and swaps in easily. To confirm the right size, just match the number on your current seating plug to the micrometer number.
Which cartridges does the #3 seat plug cover?
The #3 group is cut for the .338 family. That includes 338 Winchester Magnum, 338 Remington Ultra Magnum, 340 Weatherby Magnum, 338-06, 338 Lapua Magnum, and 338-378 Weatherby Magnum. If you are loading a different caliber, Redding offers other numbered micrometers for those cartridge groups.
Why choose the VLD version over a standard seat plug?
The VLD plug is shaped to contact longer, pointier Very Low Drag bullets higher on the ogive so you avoid marring the delicate tip. Handloaders running match bullets like ELD Match and Nosler RDF find it seats cleanly without leaving pressure rings, even with compressed powder charges. For sleek long-range projectiles it is the better match.
How precise is the seating adjustment?
The micrometer reads in thousandths of an inch, so you can dial in a specific cartridge overall length and repeat it consistently. The dial is marked in both inches and millimeters. That kind of repeatability is exactly what you want when fine-tuning seating depth for accuracy.





Reviews
There are no reviews yet.