0
0

Flexbar Rocksett All-Purpose Ceramic Adhesive 2oz Clear

UPC: 608060400268

$23.99

144 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever chased a muzzle device that keeps backing loose or you're getting ready to pin a mount to a suppressor host, Rocksett is the stuff you want in the shop. This is the original high-temp ceramic adhesive from Flexbar, and it's earned its reputation on the muzzle end of countless rifles. One grade handles it all, no mixing, no primer, no fuss. Threads need to be clean and degreased, a couple drops does the job, and less is genuinely more here.

What Makes Rocksett Different From Threadlocker

Most folks reach for a colored threadlocker, but those break down under real heat and can loosen up right where a barrel gets hottest. Rocksett laughs at temperature, holding solid from -350°F up to 2,015°F, so it stays put on brakes, flash hiders, and comps that see serious thermal cycling. It also acts as a vibration dampener, which is the real reason it keeps assemblies from walking loose round after round. On top of that it resists oils, fuels, acids, and alkalis, and it even offers electrical insulation for AC and DC applications.

Getting a Clean Bond With Rocksett

Application is about as simple as it gets. Wipe your threads dry and free of grease, put two or three drops at the thread start on one component, then torque the device to spec. Full cure runs around 24 hours at room temperature, though plenty of gunsmiths speed things along with a little heat so the gun's ready to run sooner. It's non-toxic, odorless, and non-flammable while you work, and the 2 oz dropper bottle gives you enough for a whole lot of installs with a long shelf life to spare.

When it's time to swap a device, Rocksett breaks down with water rather than heat. A warm or hot water soak softens the bond, and from there a proper torque wrench backs the device off. The 2 oz bottle is the workhorse size that suppressor makers and home builders keep on the bench for exactly this kind of work.

Key Specifications

  • Manufacturer: Flexbar
  • Product: Rocksett All-Purpose Ceramic Adhesive
  • Size: 2 oz
  • Color: Clear
  • Temperature Range: -350°F to 2,015°F
  • Bonds: Ceramic, glass, and metals
  • Electrical Insulation: AC and DC up to 20 MHz
  • Chemical Resistance: Oils, fuels, acids, alkalis
  • Application: No mixing or priming required
  • Removal: Hot water soak
  • Bottle Type: Dropper bottle
  • UPC: 608060400268
  • MPN: 15014

What’s Included

  • One 2 oz dropper bottle of Flexbar Rocksett All-Purpose Ceramic Adhesive

Frequently Asked Questions

How much Rocksett should I use to install a muzzle device?

Less is more with this stuff. Two to three drops applied at the thread start is plenty, then torque the device to your manufacturer's spec. Make sure the threads are clean and degreased first so you get a solid bond.

How long does Rocksett take to cure?

Rocksett typically reaches full cure in about 24 hours at room temperature. Many gunsmiths apply a little heat to speed the process up so the firearm is ready to shoot sooner. Give it the full cure time before you count on the bond under recoil.

How do you remove a muzzle device installed with Rocksett?

Unlike threadlockers that release with heat, Rocksett breaks down with water. Soak the joint in warm or hot water to soften the bond, then use a torque wrench to back the device off. An overnight soak works well for stubborn installs, and applying impact along with torque can help break it free.

Will Rocksett hold on a suppressor mount?

Yes, it's a favorite for exactly that job and is widely used by suppressor makers. The high temperature tolerance and vibration dampening keep the mount from walking loose during sustained fire. It's a reliable choice for pinning a brake or QD mount that serves as your suppressor host.

Additional information

UPC

608060400268

Manufacturer

Color

Clear

Quantity

1

Reviews

There are no reviews yet.

Be the first to review “Flexbar Rocksett All-Purpose Ceramic Adhesive 2oz Clear”